You are using an outdated browser and your browsing experience will not be optimal. Please update to the latest version of Microsoft Edge, Google Chrome or Mozilla Firefox. Install Microsoft Edge

January 30, 2019

Decree 169: New Regulations on Medical Devices in Vietnam

Subscribe to Updates

On December 31, 2018, the Vietnamese government promulgated Decree No. 169/2018/ND-CP (Decree 169), amending Decree No. 36/2017/ND-CP (Decree 36) on medical device management. Decree 169 took immediate effect upon its issuance. The new regulations will have a great impact on the circulation of medical devices, especially foreign products, in Vietnam. Some of the major changes are set out below.

Classification of Medical Devices

Medical devices in Vietnam are classified and managed based on their potential risks, as determined by qualified entities. Under the previous regulation (Decree 36), risk classification results from qualified foreign entities could be recognized in Vietnam without conducting a separate local classification. This was beneficial to foreign manufacturers who sell their products in many countries, as it required no further time and expense for the local classification procedure in Vietnam and ensured a single classification result across multiple markets.

However, from January 1, 2019, foreign classification results are no longer accepted in Vietnam. Instead, the results must come from qualified local entities. It is worth noting that some local entities, despite being considered qualified by the Ministry of Health (MOH), still do not have appropriate capacity to conduct medical device classifications and, in practice, have issued classification results that were not accurate.

The classification rules under Decree 169 are generally stricter than under Decree36. For example, the final classification results will use the highest risk classification, regardless of whether the product has many use purposes or is combined with other medical devices with different risk classifications.

If an incorrect local classification result is submitted to the authority for product registration purposes, the authority will refuse to grant a product registration number if the number is not yet issued or revoke a registration number that has been granted, and may recall any circulating products.

Transitional Regulations

Decree 169 sets out the transition mechanisms as below.

  • Foreign classification results submitted to the authorities prior to December 31, 2018, will continue to be used for the registration procedure.
  • Local classification results issued before December 31, 2018, will be published on the MOH’s online system (http://dmec.moh.gov.vn) before April 1, 2019. MA license/import license holders are then required to review the relevant classification results in light of the classification rules under Decree 169 and report any incorrect classification to the MOH prior to July 1, 2019.

Registration of Medical Devices

Class A Medical Devices

A major change for Class A (lowest risk) medical devices is that the certificate of free sale (CFS) – not previously required – must now be included in any registration dossier submitted after December 31, 2018. This change may cause some difficulties for foreign manufacturers in terms of cost and time, and in some cases it may be impossible to obtain the CFS because some products that are considered Class A medical devices in Vietnam are not considered medical devices in other countries.

Previously, the granted registration of a Class A medical device could not be amended. If any change arose, a new registration procedure was required. However, Decree 169 stipulates a more flexible mechanism, in which the following changes can be made to the registration during the circulation of Class A medical devices.

  • Address of product owner or license holder.
  • Name of license holder.
  • Either name or address of product manufacturer.
  • Product packaging for in vitro medical devices.
  • Warranty establishments.
  • Labels and instructions for use, but the indication of the product cannot be changed.

Class B, C and D Medical Devices

A positive development for medical device companies is that Decree 169 allows a newly added form of registration, namely, “quick registration.” This will reduce the statutory time required to obtain a registration number from 60 days to 30 days, but is only applicable to the following situations:

  • The product has been circulated in at least two of the following countries: Japan, Canada, Australia, United States, or EU member country.
  • The product was circulated in Vietnam prior to December 31, 2018, and satisfies both of the following conditions: (i) The product was circulated for at least three years within the period of five years before the submission date, and (ii) there have been no warnings about the quality or safety of the product.

Additionally, from July 1, 2020, it will be required to include the ASEAN Common Submission Dossier Template (CSDT) in the submitted registration dossier for Class B, C and D medical devices. At that time, it will no longer be necessary to submit the technical document, instructions for use, and labels. It is expected that the MOH will issue further guidance on CSDT soon.

Decree 169 helps to simplify the customs clearance procedure by emphasizing that medical devices will be allowed to be imported into Vietnam without a written confirmation from the MOH that defines the imported product as a medical device when conducting customs clearance.

Transitional Regulations

In the transition time, it is worth noting the following regulations:

  • Class A medical devices are only allowed to be imported if they are registered.
  • A marketing authorization (MA) license for Class B, C, and D medical devices will only be required from January 1, 2020, onwards, instead of January 1, 2018, as set forth under Decree 36.
  • It is required to have a valid import license to import Class B, C, and D medical devices which are specifically listed out in Circular 30/2015/TT-BYT on Import of Medical Devices (Circular 30). Import licenses issued in 2018 (expiring on December 31, 2018) or 2019 will be valid until December 31, 2019.
  • Class B, C and D medical devices that are not specifically listed out in Circular 30 can continue to be freely imported into Vietnam without any import license, provided that their certificates of classification results are published on the MOH website http://dmec.moh.gov.vn.
  • For IVD biologicals (e.g., microbiology reagents, histology reagents, etc.), Decree 169 sets out specific regulations under which such IVD biologicals can still be treated as drugs under the Pharma Law.
  • For chemicals, insecticides and germicides for household and medical use, with only one indication of disinfecting medical devices, which have been granted MA licenses which expire after July 1, 2016 and before January 1, 2019, their MA licenses will be used until December 31, 2019.
Related Professionals

Industries

Life Sciences

Practices

Regulatory Affairs

Location

RELATED INSIGHTS​ 

September 6, 2024
Addressing technical barriers to trade is a key priority for the Association of Southeast Asian Nations (ASEAN) as part of trade facilitation in achieving the single market and production base under the ASEAN Economic Community directive agreed in 2015. The region has been undertaking positive steps toward standard harmonization in ASEAN priority sectors, integrating and bringing about regulatory convergence by taking into account the diversities that exist in the ten ASEAN member states. Health supplements in ASEAN are under the responsibility of the Traditional Medicine and Health Supplement Product Working Group (TMHS PWG). One of the TMHS PWG’s outputs is the ASEAN Agreement on a Regulatory Framework for Health Supplements, which includes various technical requirements for health supplements that participating member states must adopt by adjusting their domestic regulations. The key ingredients of these health supplements are vitamins and minerals. While all ASEAN countries allow the use of vitamins and minerals in health supplements, the amounts allowed for use vary, depending on the nutritional requirements deemed appropriate by each country. Partly in response to these efforts for regional harmonization, there have been important changes to vitamin and mineral limits in certain ASEAN countries that are worth monitoring. Some of these are outlined below. Thailand In January 2024, the Thai Food and Drug Administration (TFDA) updated the Thai Recommended Daily Intake (Thai RDI) guidelines for the Thai population. Subsequently, the TFDA adjusted the vitamin and mineral limits in order to comply with the updated Thai RDI and to follow the ASEAN Agreement on a Regulatory Framework for Health Supplements. The TFDA’s adjustment of vitamin and mineral limits for use in food supplements came in Notification of the Ministry of Public Health (No. 448) B.E. 2566 (2023) Re: Food Supplements (No. 5), which was published in the Government Gazette on January
Read More
August 8, 2024
On July 19, 2024, Thailand’s Ministry of Public Health Notification No. 450 B.E.2567 (2024) came into effect after being published in the Government Gazette the day before. The notification introduces significant updates to the labeling requirements for prepackaged foods. This new regulation consolidates and updates Thailand’s rules for food labeling by repealing and replacing several previous notifications. The notification’s key changes and their implications for food businesses are identified below. 1. Clarified “Best Before” Definition The notification aligns the definition of “best before” with Codex standards. It now refers to the date marking the end of the period during which the food maintains its best quality under stated storage conditions. After this date, food quality may change, and the product cannot be marketed. 2. Updated Labeling Exceptions Certain foods are exempt from labeling requirements, with the latest list including: Foods sold directly to consumers by manufacturers who can provide product information. Unprocessed foods. Some fresh foods not sold directly to consumers. Prepackaged foods produced and sold for immediate consumption in food service settings. However, any of these exempt foods that have received food serial numbers must still have labels that comply with the notification. 3. Expiration Date and Best-Before Date Display The notification provides clearer language for displaying the expiration date and best-before date. If specific wording is required by other notifications, it must be followed. English equivalents are now permitted alongside Thai text. 4. Warning Displays Multiple applicable warnings can now be consolidated and displayed together, provided the complete message is included as specified. 5. Claims about Substances or Ingredients New guidelines have been established for making claims about food additives and ingredients. Claims should be factual, not deceptive, and provably not false. 6. Label Placement and Design Labels must be permanently affixed, proportionate to the packaging, and
Read More
August 8, 2024
Tilleke & Gibbins has contributed the Thailand chapter to the 2024 edition of Pharmaceutical Advertising from the International Comparative Legal Guides (ICLG) series published by Global Legal Group. This detailed guide offers an in-depth examination of pharmaceutical advertising laws and regulations in multiple jurisdictions around the globe. Each chapter of the guide, structured in a Q&A format, is organized into comprehensive sections covering various aspects of pharmaceutical advertising, including: General rules and codes of practice governing pharmaceutical advertising Required arrangements for ensuring compliance with advertising regulations Procedures for obtaining advertising approvals from regulatory authorities Penalties for non-compliance with advertising rules Guidelines for providing information prior to product authorization Requirements for advertisements directed at healthcare professionals Restrictions on the content of pharmaceutical advertisements The complete Thailand chapter is available as a PDF below. The Thailand chapter—and the full Pharmaceutical Advertising guide—are also freely available on the ICLG website.
Read More
July 31, 2024
On July 18. 2024, Vietnam’s Ministry of Health issued Circular No. 12/2024/TT-BYT promulgating National Technical Regulation QCVN 20-1:2024/BYT on the limits of contaminants for health supplements (“Circular 12”). The new national technical regulation is the very first relating to health supplements, and is expected to have a great impact on the control of health supplement quality in Vietnam. Circular 12 will take effect on August 1, 2025. Contents of Circular 12 The new circular prescribes limits of contaminants (heavy metals and microorganisms), testing samples and testing methods, management requirements, and responsibilities of entities manufacturing and trading in health supplements. Supplemented alcohol products which are declared as health supplements are notably excluded from the scope of the regulation. Transitional Provisions Health supplements which (i) have been granted a declaration registration certificate, and (ii) are manufactured before August 1, 2025, are allowed to continue to be imported, traded, and circulated until the expiry date of the product, even if it is not aligned with Circular 12, except when there is food safety warning. Declaration registration dossiers for health supplements submitted before August 1, 2025, will continue to be handled in accordance with the prevailing regulations at the time of submission. From August 1, 2025, if a health supplement with a granted declaration registration certificate has a manufacturer’s standard that does not comply with Circular 12, the party manufacturing/trading in the product must adjust the product standard to conform to Circular 12 and notify the authority of this adjustment.
Read More