You are using an outdated browser and your browsing experience will not be optimal. Please update to the latest version of Microsoft Edge, Google Chrome or Mozilla Firefox. Install Microsoft Edge

September 26, 2024

Indonesia Issues New Franchise Regulation

Subscribe to Updates

Indonesia enacted a new franchise regulation, Government Regulation No. 35 of 2024 on Franchising (“GR 35/2024”), on September 2, 2024.

Franchising in Indonesia was previously governed by Government Regulation No. 42 of 2007 on Franchising (“GR 42/2007”), along with an implementing regulation, Ministry of Trade Regulation No. 71 of 2019 regarding Implementation of Franchising (“MOT Regulation 71/2019”).

This new regulation repeals GR 42/2007. However, MOT Regulation No. 71/2019 remains in effect until a new MOT regulation can be enacted.

The new franchise regulation contains several amendments and provides more detailed requirements to complement MOT Regulation No. 71/2019.

Comparison of GR 35/2024 to GR 42/2007

  • Minimum years of business operation. The new regulation reduces the minimum duration that a franchise registration applicant must have been operating from five years to three years.
  • Intellectual property (IP) status. Any relevant IP must now be registered before a franchise registration application can be submitted. This is a change from the previous regulations, under which it was possible to obtain a franchise registration (STPW) while an IP application was still pending, and if the IP application could not be registered, the STPW would be canceled.
  • Registration requirements for foreign franchisors. Under the new regulation, foreign franchisors must provide a legalized or apostilled business permit document from the country of origin in addition to the previously required franchise offering prospectus and statement letter from the relevant Indonesian authority.
  • Administrative sanctions. The new regulation has adjusted the three escalating stages of administrative sanctions to (1) two warning letters, (2) a 14-day suspension from business activities, and (3) STPW revocation. This varies from the three stages under the previous regulation (three warning letters, fine, and STPW revocation). The new regulation also expands the list of noncompliant actions that are subject to these administrative sanctions. In addition to the regulatory obligations detailed in the previous regulation, failure to use the proper franchise logo and failure to submit activity reports are now also punishable by these administrative sanctions.
  • Types of franchise organizers. The new regulation expands the categories of franchise organizers (i.e., the main parties to a franchise business arrangement) from two (franchisor and franchisee) to eight, including subfranchisors and subfranchisees for both foreign and local franchises.
  • Franchise registration (STPW) validity. The new regulation specifies conditions for STPW invalidity (e.g., termination of agreement, business cessation, IP expiration), and there is no longer a need to renew the STPW every five years. Under the previous regulation, STPW validity was limited to five years (renewable).

Notwithstanding these changes and updates, the core structure of Indonesia’s franchise regulations remains similar. In addition, many of the new provisions in GR 35/2024 had already been adopted in the aforementioned MOT Regulation 71/2019.

Implications

GR 35/2024 streamlines some processes (e.g., no longer requiring STPW renewal every five years) and tightens some requirements (e.g., regarding IP registration). It also provides more detailed categorization of franchise organizers and clearer sanction procedures, potentially aiming for a more structured and comprehensive regulatory framework.

These changes are designed to enhance the regulatory framework, ensuring a more compliant and robust franchise industry. This new regulation reflects the government’s commitment to fostering the growth of franchises, which continue to make significant contributions to the Indonesian economy.

For more details on GR 35/2024, or on any aspect of franchising in Indonesia, please contact Tilleke & Gibbins at [email protected].

Related Professionals

Industries

Consumer Products

Practices

Intellectual Property

Location

RELATED INSIGHTS​ 

September 28, 2023
Protecting the aesthetic features of consumer items, such as household appliances, is essential for businesses looking to gain a competitive edge, particularly in the dynamic markets of Vietnam, Indonesia, and Thailand. Industrial design registrations (or design patents in Thailand) provide an effective means to protect the unique and ornamental designs of products, ensuring that their distinctive appearance is not imitated by competitors. This article provides a general overview of design systems in Vietnam, Indonesia, and Thailand, as well as some key considerations for businesses and rights holders. All three of these countries use an examination system for assessing applications to protect designs. While all three jurisdictions are members of the Paris Convention, only Vietnam has fully completed the process of becoming a member of the Hague Agreement. The table below offers a general comparison of the three countries’ design systems, with additional details provided in the subsequent sections. Vietnam Owners of a household appliance design may seek design rights in Vietnam by filing a national design application at the Vietnam IP Office or by filing an international design application designating Vietnam either directly with the World Intellectual Property Organization (WIPO) or indirectly through the office of the applicant’s contracting party under the Hague Agreement. Vietnam’s 2022 IP Law redefines “industrial design” as the external appearance of a product or part thereof to be assembled into a complex product, represented by shapes, lines, colors, or a combination thereof, and visible in the process of exploiting the utility of the product or complex product. The two options for obtaining design rights in Vietnam are detailed below. Vietnam National Design Application As Vietnam is a signatory to the Paris Convention, applicants are entitled to a six-month convention priority period from the filing date of the corresponding application in another jurisdiction. Under Vietnam’s
Read More
September 26, 2023
Cambodia has issued a set of regulations that aim to encourage greater energy efficiency from appliances marketed in the country. The regulations follow Cambodia’s adoption of its National Energy Efficiency Policy, which sets out the government’s energy efficiency targets and policies to reach them by 2030, including the ambitious national target of reducing the country’s total energy consumption by at least 19%. This set of regulations for appliances marketed in Cambodia is contained in Sub-Decree No. 254 on the Management and Improvement of Energy Efficiency of Electrical Appliances, dated August 11, 2023. This sub-decree sets out product registration and energy efficiency labeling requirements for electrical appliances marketed in Cambodia. It further provides that appliances should meet energy efficiency standards and all other mandatory standards that apply to electrical appliances. During the product registration process, the appliances are checked against such standards, and registration is only granted if the standards are met. The sub-decree identifies the Ministry of Mines and Energy as the main ministry responsible for the implementation of the sub-decree. To assist with the wide scope of regulations as set by the sub-decree, it further appoints assisting ministries that may implement and enforce only certain aspects. These effective implementation and enforcement mechanisms suggest that once the sub-decree’s 12-month implementation period has passed, there is likely to be a rather strict enforcement approach to the requirements. Key Features of the Sub-Decree Several mandatory standards have already been applied to most electrical appliances over the past years, but the required product registration process to check for compliance with those standards has not always been completed by those importing, distributing, or manufacturing electrical appliances in Cambodia. The new sub-decree clearly mandates a product registration requirement as a check to verify the applicable standards are met, and sets penalties for non-compliance. Penalties
Read More
September 21, 2023
Myanmar’s Ministry of Commerce has announced its E-commerce Guidelines to regulate stakeholders engaging in e-commerce. The guidelines—which were issued on September 5, 2023, and took immediate effect—are mandatory for e-commerce business operators (both entities and individuals), and failure to comply with the guidelines’ requirements may result in penalties under relevant laws. The E-commerce Guidelines come as Myanmar seeks to increase its regulation of e-commerce activities. The guidelines were preceded by a July 2023 notification requiring e-commerce business operators to register their activities with the Ministry of Commerce by January 21, 2024. Definitions “E-commerce” is defined as the sale of goods or services on the internet or other digital platforms. The term also covers sales promotions, marketing, logistics, ordering, and delivery. An “e-commerce platform entrepreneur” is a person who manages an e-commerce platform where two or more entrepreneurs can conduct e-commerce. An “e-commerce business operator” is a person operating or authorized to operate e-commerce activities. This includes e-commerce platform entrepreneurs, entrepreneurs selling on e-commerce platforms, and sellers through social media platforms. Electronic Contracts Acceptable forms of electronic contracts, which must comply with the Electronic Transactions Law, Contract Act, and other relevant laws, include: Click-wrap, click-through, and web-wrap contracts; Browse-wrap contracts; and Agreements between seller and buyer on social media platforms, such as by accepting or rejecting an offer via direct message. Samples of contract forms are appended to the guidelines. Consumer Protection Disclosure notices for consumers must be comprehensible, correct, consistent, simple, accessible, and visible. They can be written in Myanmar language, English, or Myanmar language and another language. They must also comply with the relevant provisions of the Consumer Protection Law. The guidelines provide that if the agreed delivery date is eclipsed by more than 15 days, the consumer may terminate the contract and request a full refund of
Read More
August 9, 2023
Cambodia imports a substantial amount of food products to meet its domestic demand. Most of these imported products are from nearby ASEAN countries, with Thailand, Malaysia, and Vietnam providing the bulk of these food imports. However, food products from markets further away are becoming more popular each year, including brands from Australia, Japan, China, the EU, South-Korea, and the US. Many food product owners and distributors do not realize that all types of prepackaged food products, including imports, require product registration before they are permitted to be sold in Cambodia. This usually requires an assessment against mandatory Cambodian Standards and local technical regulations. There are general Cambodian Standards that cover all types of prepackaged food products, as well as product-specific standards and regulations that may be applicable. Furthermore, any type of prepackaged food product sold in Cambodia must bear a Khmer language label that meets the minimum consumer information standards, and the Cambodian Standards. This label requirement is often overlooked, with many products on the market bearing only a foreign language label. Product Registration & Labeling Requirements Back in 2000, a Cambodian Standard on prepackaged food labeling was adopted, clearly mandating Khmer language labeling for all types of prepackaged foods. Unfortunately, this labeling standard was not widely adopted by the industry, and even today compliance is low. Low compliance, combined with a lack of widespread enforcement efforts, led to a misguided understanding that imported food products were not subject to any standards, did not require product registration, and were not required to bear Khmer language labeling. Recent legal developments related to consumer protection and food safety clarified several of these misunderstandings. For example, the regulations clearly state that all types of food product must meet the applicable standards and technical regulations, which is assessed through registration. The new Law
Read More