You are using an outdated browser and your browsing experience will not be optimal. Please update to the latest version of Microsoft Edge, Google Chrome or Mozilla Firefox. Install Microsoft Edge

September 26, 2023

Cambodia Sets Registration, Standardization, and Energy Efficiency Rules for Appliances

Cambodia has issued a set of regulations that aim to encourage greater energy efficiency from appliances marketed in the country. The regulations follow Cambodia’s adoption of its National Energy Efficiency Policy, which sets out the government’s energy efficiency targets and policies to reach them by 2030, including the ambitious national target of reducing the country’s total energy consumption by at least 19%.

This set of regulations for appliances marketed in Cambodia is contained in Sub-Decree No. 254 on the Management and Improvement of Energy Efficiency of Electrical Appliances, dated August 11, 2023.

This sub-decree sets out product registration and energy efficiency labeling requirements for electrical appliances marketed in Cambodia. It further provides that appliances should meet energy efficiency standards and all other mandatory standards that apply to electrical appliances. During the product registration process, the appliances are checked against such standards, and registration is only granted if the standards are met.

The sub-decree identifies the Ministry of Mines and Energy as the main ministry responsible for the implementation of the sub-decree. To assist with the wide scope of regulations as set by the sub-decree, it further appoints assisting ministries that may implement and enforce only certain aspects. These effective implementation and enforcement mechanisms suggest that once the sub-decree’s 12-month implementation period has passed, there is likely to be a rather strict enforcement approach to the requirements.

Key Features of the Sub-Decree

Several mandatory standards have already been applied to most electrical appliances over the past years, but the required product registration process to check for compliance with those standards has not always been completed by those importing, distributing, or manufacturing electrical appliances in Cambodia.

The new sub-decree clearly mandates a product registration requirement as a check to verify the applicable standards are met, and sets penalties for non-compliance. Penalties include fines, suspension of business activities, seizure of noncompliant appliances, and revocation of business licenses and permits.

Furthermore, the sub-decree regulates a wider scope of appliances. It clearly applies to all types of electrical appliances, both those locally manufactured and those imported into Cambodia. Before, the standards were perhaps more fragmented, and there was a misguided understanding that imports were not always subject to the standards adopted in Cambodia.

Energy efficiency labels are also mandatory under the sub-decree. The procedures to apply for a label will be set out in a future implementing regulation to be issued by the Ministry of Mines and Energy.

The ministry may also exempt certain appliances from needing an energy label or being required to undergo product registration. It may also institute product-specific rules, such as requiring more detailed labeling and registration requirements for a group of high-risk appliances.

Unless otherwise exempted, all appliances must have an energy efficiency label to be sold in Cambodia.

Implementation of the Sub-Decree

The Ministry of Mines and Energy is responsible for the overall energy efficiency policy, promoting energy efficiency, and the general implementation of the sub-decree. The ministry is also tasked with preparing lists of appliances, which will determine how these appliances are regulated.

Assisting with inspecting, verifying, and enforcing the applicable standards is a task assigned to the Ministry of Industry, Science, Technology and Innovation, which includes the Institute of Standards of Cambodia.

Assisting with enforcement aspects is assigned to the Ministry of Commerce. The ministry’s consumer protection department (known as the CCF) will likely be made responsible for checking the internal market for compliance, and notably, counterfeit appliances, as this is referred to in the sub-decree.

Lastly, the sub-decree assigns a role to the General Department of Customs and Excise of Cambodia to enforce the rules for electrical appliances imported into Cambodia.

The comprehensive approach to implementing and enforcing this law perhaps signals a new approach from the government toward enforcing new laws or regulations. Where in the past a law would usually assign the authority to implement and enforce it to one single ministry, this sub-decree sets out an interministerial approach, utilizing the strengths of various ministries. In theory, this should lead to more effective and swift implementation, which would be a positive development for the overall legal framework in Cambodia.

Implementation Period

The sub-decree does not go into force directly. Rather, there is a 12-month period for its implementation. After August 11, 2024, any implementing regulation for a specific group of appliances would have another 12-month implementation period before that regulation would be enforced.

Companies engaged in trading and marketing electrical appliances in Cambodia should therefore prepare for the full implementation of the sub-decree in the coming year and look out for any subsequent appliance-focused regulations that could be adopted in the future.

RELATED INSIGHTS​ 

April 10, 2026
As digital commerce continues to reshape consumer behavior in Thailand, the Office of the Consumer Protection Board (OCPB) has been taking steps to review and update key regulations for online platforms. The OCPB has had a particular focus on addressing the risks posed by e-marketplace businesses—from misleading product information to fraudulent online transactions. Some of the regulator’s current legislative efforts related to Thailand’s labeling regulations as well as potential changes to the country’s law on direct sales and marketing. Proposed Changes to Consumer Protection Labeling Regulations On February 24, 2026, the OCPB convened a public hearing to review the Notification of the Committee on Labels re: Specification of Goods as Controlled Label Goods B.E. 2565 (2022) and its annex issued under the Consumer Protection Act. The closed-door session, which started the OPCD’s process of seeking feedback on the proposed changes, brought together representatives from government agencies, business operators, and consumer groups. The OCPB explained that its review of the labeling regulations aims to address regulatory gaps arising from evolving commercial practices, particularly the expansion of e-commerce and cross-border transactions. Authorities highlighted recurring issues involving product information that is unclear, incomplete, or potentially misleading in digital sales channels. The proposed revisions are intended to improve consumers’ access to accurate and complete product information, ensure that label disclosures remain relevant amid the growth of e-commerce, and strengthen protections against deceptive or misleading digital advertising. The review is being undertaken pursuant to the Consumer Protection Act B.E. 2522 (1979). As part of the initiative, the OCPB signaled a potential update to the categories of “controlled label products” as well as enhanced disclosure obligations for business operators, with the broader aim of promoting greater transparency, reinforcing operator accountability, and aligning Thailand’s labeling framework with current market conditions. The OCPB secretary general emphasized that
April 1, 2026
On March 30, 2026, Thailand’s Customs Department announced a strategy to raise import duties on a broad range of consumer goods—including plastic items and electronics accessories—to their maximum statutory ceilings, which often sit at 30% or 40%. Many of these goods currently benefit from promotional or incentive rates as low as 5%. For importers, e-commerce platforms, and logistics providers, this development demands immediate attention. While these increases generally require cabinet approval, they do not require full parliamentary amendment of the Customs Tariff Decree B.E. 2530, as the Customs director-general and the finance minister hold delegated authority to adjust rates within existing statutory bounds. Businesses should not assume that the legislative process will provide significant lead time before higher rates take effect. Death of the De Minimis: Abolishing the THB 1,500 Loophole This “ceiling-rate” policy, which is designed to equalize the landed cost of foreign goods with the domestic production costs of Thai manufacturers, builds on a sweeping set of customs reforms that have already begun to reshape Thailand’s trade environment. The foundation of this new regime was laid on January 1, 2026, when Thailand formally abolished the longstanding THB 1,500 duty exemption for small imported parcels under Customs Notification No. 219/2568. Every imported item is now subject to VAT and applicable import duties for its declared value, regardless of parcel size or transaction amount. By narrowing the scope of exemptions previously granted to low-value goods under the Customs Tariff Decree B.E. 2530, the government has made clear that the era of tax-free cross-border micro-imports is over. Three-Phased Strategy and Legal Modernization The March 30 announcement is the second phase of a three-part regulatory roadmap: Immediate enforcement: The removal of the THB 1,500 loophole and the imposition of VAT on all parcels, effective January 1, 2026. Tariff realignment: The current
March 31, 2026
Thailand’s Office of the Consumer Protection Board has opened a public hearing period on draft regulations governing the transfer of direct sales and direct marketing businesses. The draft Notification of the Direct Sales and Direct Marketing Committee: Criteria and Procedures for Business Transfer and Amendment of Registration for Direct Sales or Direct Marketing Businesses establishes a compliance-focused process with strict documentation requirements and timelines for transferring direct sales and direct marketing businesses. The proposed framework also defines the roles of transferors and transferees and establishes application procedures with the Office of the Consumer Protection Board. Applications may be submitted in person or electronically and will be examined to confirm they are complete, authentic, and compliant with legal requirements. This includes verification that: The transferee meets all required qualifications; No disqualifying factors apply; and The applicant is not subject to legal restrictions. The public hearing period is open until April 29, 2026. Direct sales and direct marketing business operators should prepare for these proposed requirements to ensure compliant implementation once the regulations are finalized.
March 20, 2026
Myanmar has introduced a comprehensive new regulatory framework for alcoholic beverages that will impose stricter controls on production, distribution, advertising, and sales. On March 7, 2026, the National Defence and Security Council issued a new Excise Law (NDSC Law No. 13/2026), repealing the Excise Act of 1917. The law, which has not yet entered into force, will take effect on a date to be specified in a separate notification—likely within this year. The new Excise Law establishes clearer definitions, introduces multiple categories of excise licenses and permits, and significantly expands prohibitions and compliance obligations for businesses operating in the alcohol sector. Many operational details will be clarified through implementing rules and notifications. Scope and Definitions The new law defines “excise” to cover alcoholic liquor and excisable articles. Alcoholic liquor is broadly defined as any liquid containing more than 0.5% ethyl alcohol, including beer, wine, toddy sap, fermented liquor, and any other liquid declared as alcohol by notification of the relevant ministry, excluding denatured alcohol. Alcoholic liquor is further categorized into country liquor, foreign liquor, and international‑standard domestically produced liquor. Excise Licensing The law also introduces a more detailed licensing regime. The following types of liquor excise licenses are available: Production Production of value-added products Bottling Distribution Sales Other excise‑related businesses designated by General Administrative Department (GAD) notification The GAD will prescribe the licensing fees, requirements, and conditions for each category through notifications issued with the approval of the Ministry of Home Affairs. The GAD may also, with the approval of the Ministry of Home Affairs, prescribe quantities and volumes of alcoholic beverages that may be possessed without a liquor license. No such prescribed quantities have yet been issued. Holders of excise licenses for manufacturing, production of value-added products, or bottling must obtain approval from the relevant government department or