Cambodia Sets Registration, Standardization, and Energy Efficiency Rules for Appliances

September 26, 2023

Cambodia Sets Registration, Standardization, and Energy Efficiency Rules for Appliances

Cambodia has issued a set of regulations that aim to encourage greater energy efficiency from appliances marketed in the country. The regulations follow Cambodia’s adoption of its National Energy Efficiency Policy, which sets out the government’s energy efficiency targets and policies to reach them by 2030, including the ambitious national target of reducing the country’s total energy consumption by at least 19%.

This set of regulations for appliances marketed in Cambodia is contained in Sub-Decree No. 254 on the Management and Improvement of Energy Efficiency of Electrical Appliances, dated August 11, 2023.

This sub-decree sets out product registration and energy efficiency labeling requirements for electrical appliances marketed in Cambodia. It further provides that appliances should meet energy efficiency standards and all other mandatory standards that apply to electrical appliances. During the product registration process, the appliances are checked against such standards, and registration is only granted if the standards are met.

The sub-decree identifies the Ministry of Mines and Energy as the main ministry responsible for the implementation of the sub-decree. To assist with the wide scope of regulations as set by the sub-decree, it further appoints assisting ministries that may implement and enforce only certain aspects. These effective implementation and enforcement mechanisms suggest that once the sub-decree’s 12-month implementation period has passed, there is likely to be a rather strict enforcement approach to the requirements.

Key Features of the Sub-Decree

Several mandatory standards have already been applied to most electrical appliances over the past years, but the required product registration process to check for compliance with those standards has not always been completed by those importing, distributing, or manufacturing electrical appliances in Cambodia.

The new sub-decree clearly mandates a product registration requirement as a check to verify the applicable standards are met, and sets penalties for non-compliance. Penalties include fines, suspension of business activities, seizure of noncompliant appliances, and revocation of business licenses and permits.

Furthermore, the sub-decree regulates a wider scope of appliances. It clearly applies to all types of electrical appliances, both those locally manufactured and those imported into Cambodia. Before, the standards were perhaps more fragmented, and there was a misguided understanding that imports were not always subject to the standards adopted in Cambodia.

Energy efficiency labels are also mandatory under the sub-decree. The procedures to apply for a label will be set out in a future implementing regulation to be issued by the Ministry of Mines and Energy.

The ministry may also exempt certain appliances from needing an energy label or being required to undergo product registration. It may also institute product-specific rules, such as requiring more detailed labeling and registration requirements for a group of high-risk appliances.

Unless otherwise exempted, all appliances must have an energy efficiency label to be sold in Cambodia.

Implementation of the Sub-Decree

The Ministry of Mines and Energy is responsible for the overall energy efficiency policy, promoting energy efficiency, and the general implementation of the sub-decree. The ministry is also tasked with preparing lists of appliances, which will determine how these appliances are regulated.

Assisting with inspecting, verifying, and enforcing the applicable standards is a task assigned to the Ministry of Industry, Science, Technology and Innovation, which includes the Institute of Standards of Cambodia.

Assisting with enforcement aspects is assigned to the Ministry of Commerce. The ministry’s consumer protection department (known as the CCF) will likely be made responsible for checking the internal market for compliance, and notably, counterfeit appliances, as this is referred to in the sub-decree.

Lastly, the sub-decree assigns a role to the General Department of Customs and Excise of Cambodia to enforce the rules for electrical appliances imported into Cambodia.

The comprehensive approach to implementing and enforcing this law perhaps signals a new approach from the government toward enforcing new laws or regulations. Where in the past a law would usually assign the authority to implement and enforce it to one single ministry, this sub-decree sets out an interministerial approach, utilizing the strengths of various ministries. In theory, this should lead to more effective and swift implementation, which would be a positive development for the overall legal framework in Cambodia.

Implementation Period

The sub-decree does not go into force directly. Rather, there is a 12-month period for its implementation. After August 11, 2024, any implementing regulation for a specific group of appliances would have another 12-month implementation period before that regulation would be enforced.

Companies engaged in trading and marketing electrical appliances in Cambodia should therefore prepare for the full implementation of the sub-decree in the coming year and look out for any subsequent appliance-focused regulations that could be adopted in the future.

Related Professionals

David Mol

Cambodia

+855 23 964 210

Email

RELATED INSIGHTS

March 19, 2026

Thailand’s Digital Platform Services Regulatory Roadmap for 2026

Thailand’s Electronic Transactions Development Agency (ETDA), which describes itself as a “co-creation regulator” working collaboratively with industry rather than imposing top-down rules, has unveiled its regulatory roadmap for digital platform businesses under the Royal Decree on Digital Platform Service Businesses B.E. 2565 (2022). The 2026 regulatory approach is guided by three core principles—“practicable, verifiable, shared responsibility”—aimed at elevating digital services to be safe, transparent, and fair. These principles inform ETDA’s 2026 priorities, which focus on three key dimensions: product and service standards on platforms, fair competition and fee transparency, and online fraud prevention. Product and Service Standards ETDA’s 2026 agenda addresses product and service standards across several platform categories: Online marketplace platforms. The Notification on Additional Measures for Online Marketplace Platforms under Section 18(2) came into force on December 31, 2025, designating 21 marketplace platforms that must verify products and merchants. Among other obligations, covered platforms must remove or suspend substandard products under the “notice and take down” principle. The ETDA has collaborated with the Food and Drug Administration and the Thai Industrial Standards Institute to develop inspection manuals and coordinate compliance procedures. Social commerce. The ETDA is preparing a new notification under Section 18(2) specifically targeting social commerce platforms with sales support functions, aiming to align regulation with evolving digital market conditions. Ride sharing. Since the postponement of the deadline to comply with the ETDA’s notification on ride-sharing platforms to March 31, 2026, the ETDA has supported drivers in registering with the Department of Land Transport through the Driver Verify registration system, which has already issued certifications to approximately 27,900 riders. The ETDA is also examining structural issues relating to appropriate insurance packages, motorcycle engine capacity expansion, and fair leasing fees and contract transfer costs in coordination with the Department of Land Transport, the Office of Insurance Commission,

March 12, 2026

Thailand’s Advertising Guidelines Targeting AI-Generated Content

Thailand’s AI legislative framework took another step forward when the Office of the Consumer Protection Board (OCPB) issued a notification establishing guidelines for AI-generated advertising that may cause material misunderstanding about products or services. The notification, which is already in effect, was issued under the Consumer Protection Act B.E. 2522 (1979) and its amendments, which prohibit advertising that is unfair to consumers or may cause harm to society, including false or exaggerated statements and statements that may cause material misunderstanding about products or services. The notification addresses emerging advertising practices, including the use of images edited using software or AI to attract consumer interest or build credibility. The OCPB noted that such advertising may result in consumers misunderstanding the essential characteristics, condition, or usage of products, which violates consumer rights and causes damage. Key Requirements on AI-Generated or Digitally Manipulated Advertising Content For advertisements using still images or videos created or edited with software programs or AI tools that may cause the depicted product or service to differ from the actual product sold or service provided—which may cause misunderstanding regarding the condition, quality, quantity, or other essential aspects of the products or services—advertisers and business operators must comply with the following requirements: Prior authorization. Obtain approval from relevant regulatory authorities where required by law. Accurate representation. Ensure that the advertised size, quantity, volume, number, or composition matches the actual product or service being sold, whether in still images or videos. Mandatory AI disclosure labels. Display clear disclosures when AI or software is used to create or edit images, such as: “Real image or simulation edited using AI” “Photo from actual location or simulation edited using AI” “Photo from actual product or edited simulation” “Image created by AI” “Video created by AI” Clarity of disclosure. Ensure disclosures are clearly visible,

March 9, 2026

EV Liability under Thailand’s Product Liability Law

Over the past several years, numerous automobile manufacturers have brought electric vehicles (EVs) to the market and received positive feedback from consumers in Thailand and around the world. EVs have gained popularity due to their lower maintenance costs, reduced energy expenses, and environmental benefits. However, reports have emerged of EVs causing problems such as battery fires, autopilot malfunctions leading to accidents, and safety systems such as brakes engaging automatically under inappropriate conditions. Even when these situations do not cause injury to drivers or passengers, they raise significant concerns for EV manufacturers, importers, and sellers operating in Thailand. These problems may seriously impact businesses if the products are identified as unsafe under Thailand’s Product Liability Act (PLA), officially known as the Liability for Damages Arising from Unsafe Products Act. Under this law, authorities or courts can order business operators to recall products from the market or prohibit their export, import, or sale. To manage and mitigate the risk of being found liable for damages due to an unsafe product under the PLA, EV business operators should be aware of the scope of the law. Potentially Liable Parties The PLA identifies several types of entrepreneurs and business operators—both individuals and entities—as “potentially liable parties” (PLPs) who may be held liable under the law. In the EV context, this could include vehicle manufacturers, battery suppliers, software developers whose systems are integrated into the vehicle, and local importers or distributors. Specifically, the PLA covers: Manufacturers or hirers Importers Sellers of goods for which the manufacturer, hirer, or importer cannot be identified Any other party who uses the name, trade name, trademark, or statements associated with the alleged unsafe products, or acts in a manner that causes them to be perceived as a manufacturer, hirer, or importer Definition of “Product” and “Unsafe Product” The

January 6, 2026

Thailand Issues High-Risk Product List for Digital Marketplaces

On December 30, 2025, Thailand’s Electronic Transactions Development Agency (ETDA) notified digital marketplace operators of a consolidated list of “high‑risk products” that are subject to strict monitoring on digital platforms. The list was jointly prepared by the Thai Industrial Standards Institute (TISI) and the Food and Drug Administration (FDA) to guide platform compliance in the initial phase of implementation of the Electronic Transaction Committee’s Notification on Other Measures for Marketplace for Goods with Specific Characteristics under Section 18(2) of the 2022 Royal Decree on Digital Platform Businesses Requiring Notification B.E.2568 (2025). The notice is addressed to operators of digital platform services that function as product marketplaces with specific characteristics laid out in the notification. The ETDA states that the TISI and the FDA are closely monitoring the high‑risk product categories on digital platforms, and the published list serves as the baseline reference for platform screening during the initial phase of the notification’s implementation. High‑Risk Product List The list aggregates categories of products that are illegal to sell online or are otherwise tightly regulated under Thai law, with an emphasis on health-related products, controlled substances, medical devices, and a wide range of industrial products that require certification or compliance with specified Thai Industrial Standards, as detailed below. Prohibited and tightly controlled health products. This includes all categories of modern medicines subject to control other than general household remedies; all categories of controlled herbal products except for over-the-counter herbal products; narcotics; psychotropic substances; and medical devices requiring use in medical facilities or a physician’s prescription. Selected industrial products requiring heightened controls. The list highlights dozens of TISI-regulated items commonly sold online. Examples include pacifiers, rice cookers, electrical wire, food wrap film, crayons, washing machines and dryers, air conditioners, electric cookers and air fryers, water heaters, microwave ovens, LED luminaires, hair dryers

Industries

Practices

September 26, 2023