You are using an outdated browser and your browsing experience will not be optimal. Please update to the latest version of Microsoft Edge, Google Chrome or Mozilla Firefox. Install Microsoft Edge

October 25, 2016

Medical Device Regulations Updated in Vietnam

Subscribe to Updates
Vietnam Pharma Update

On May 15, 2016, shortly before the new Law on Pharmacy was adopted, the Vietnamese government issued Decree No. 36/2016/ND-CP on the management of medical devices (Decree 36). This decree took effect on July 1, bringing medical devices under uniform management. Previously, there were two separate systems of legislation—one for medical devices manufactured domestically and the other for imported medical devices. All domestically manufactured medical devices had to be registered and granted marketing authorization licenses (MA licenses) from the Department of Medical Equipment and Health Works (DMEHW) under the Ministry of Health before being circulated. Foreign medical devices, on the other hand, did not require registration but had to obtain import licenses from the DMEHW to be imported and circulated in Vietnam.

In practice, management via import license created difficulties for foreign medical device companies, because each shipment required a new license. In addition, only 49 types of foreign medical devices were included in the list of medical devices requiring an import license—other types were, by default, exempt. This led to difficulties for the competent authorities because they needed to continually update the list or risk omitting new medical devices which, by their nature, should be strictly managed.

Decree 36 appears to provide some improvements in management. Some of the changes brought about by the new decree include:

1. Medical devices will be managed based on the risks that they pose to patients, and other risks related to design and manufacturing, and will be classified into four types based on risk level, from type-A (lowest risk) to type-D (highest risk). This classification is harmonized with ASEAN regulations.

2. All medical devices will be managed through MA licenses. If a foreign medical device has been granted an MA license, such medical device can be freely imported into Vietnam without any import license or import quota, provided that the MA license is still valid. There are two different types of MA license:

  1. MA licenses for type-A medical devices use the receipt number of their quality declaration dossiers, and are valid indefinitely.
  2. MA licenses for type-B, -C, and -D medical devices use the numbers from their circulation registration certificates, and are valid for five years.

3. Representative offices of foreign medical device owners can be applicants for MA licenses of medical devices.

4. Type-C and -D medical devices, which invade the human body, must undergo clinical trials in Vietnam.

In addition, the decree sets out conditions for companies and individuals who provide technical advisory services in medical devices. This area was not previously mentioned in legislation.

Under the new decree, management of medical devices will be tightened, but the legislation system will be clearer and more systematic. Overall, companies operating in the medical devices industry should find it easier to conduct business in Vietnam.

Download Full Article
Related Professionals

Industries

Life Sciences

Practices

Regulatory Affairs

Location

RELATED INSIGHTS​ 

September 28, 2026
On September 15, 2026, the Thai Food and Drug Administration (Thai FDA) opened a public consultation period on the principles of a proposed Ministry of Public Health (MOPH) notification establishing specific Good Manufacturing Practice (GMP) requirements for foods derived from cultured animal cells. The proposal would build on Thailand’s existing safety assessment framework by proposing GMP requirements specifically tailored to the production of cultivated meat. As cultivated meat advances toward commercial production, its unique manufacturing processes present food safety challenges involving aseptic conditions, starting cell quality, culture media, and specialized equipment. Thailand’s Food Act B.E. 2522 (1979) provides the legal basis for regulating food manufacturing, but no GMP requirements specifically tailored to cultivated meat have been issued under it. The proposed framework aims to address this gap. The Thai FDA has not yet released a complete draft notification, so the proposed requirements outlined below may change before adoption. However, they indicate the direction the regulator intends to take, and companies preparing to enter the Thai market can use them now to anticipate their compliance obligations. What Is Cultivated Meat? Cultivated meat, also known as cell-based food or cell-cultured meat (and referred to in the proposed notification as food derived from cultured animal cells), is produced by cultivating animal cells rather than raising and slaughtering animals through conventional meat production. The process generally begins with the selection of animal cells or stem cells, which are cultivated in an appropriate culture medium within a bioreactor to promote cell growth and proliferation. Scaffolding materials or other techniques may subsequently be used to develop cells into tissue or other forms suitable for consumption. Unlike conventional meat production, this process introduces specific food safety considerations relating to starting cells, culture media, production substances, contamination controls, and potential residues in the final product. Thailand’s Safety
Read More
September 9, 2026
On August 5, 2026, the Consumer Case Division of Thailand’s Civil Court rendered a judgment in a case involving a beauty clinic that advertised acne scar treatments using claims that the clinic was operated by a specialist physician and that the treatment, allegedly involving stem cell technology, could permanently remove acne scars. The plaintiff brought a claim against both the physician-owner and the clinic company, alleging that the advertisements were false and induced her to purchase the treatment. The court found that the clinic was liable for the false representations and that the physician-owner, as both the authorized director of the company and the medical practitioner who provided treatment, was jointly responsible. Although the plaintiff could not fully prove all damages claimed, the court awarded compensation of THB 20,000, together with interest. While the judgment arose from a consumer protection dispute, it serves as a valuable reminder that medical facility advertisements in Thailand are regulated and may expose clinics and healthcare providers not only to regulatory enforcement but also to civil liability from patients who rely on misleading promotional claims. Regulatory Framework Governing Medical Facility Advertisements Medical facility advertising in Thailand is governed by the Medical Facility Act B.E. 2541 (1998), as amended by the Medical Facility Act (No. 4) B.E. 2559 (2016). The principal secondary legislation is the Department of Health Service Support (DoHSS) Notification Re: Rules, Procedures, Conditions, and Fees for an Advertisement or Publication Concerning a Medical Facility, which came into force on November 25, 2019. Under this notification, “advertising” includes any act, by any means, that causes members of the public to see, hear, or otherwise become aware of a message, sound, or image for the commercial benefit of a medical facility. This broad definition covers not only traditional media but also clinic websites, social
Read More
September 9, 2026
On June 30, 2026, Indonesia’s National Agency of Drug and Food Control (BPOM) issued BPOM Regulation No. 11 of 2026 on Food Packaging, which expands the list of approved food-contact substances and recognizes a broader range of permissible functions for those substances. The new regulation, which revokes BPOM Regulation No. 20 of 2019, reflects developments in packaging technology and materials science. Although the new regulation provides more advantages to business actors by adding more food contact substances to the approved list for use in food packaging, there are more stringent rules and restrictions for testing. One of the most significant changes is a comprehensive migration-testing framework that sets out requirements for packaging materials, testing conditions, food simulants, and specific migration limits. Overall and Specific Migration Under BPOM Regulation No. 20 of 2019, migration requirements were primarily set out within the lists of approved food-contact substances and packaging materials. BPOM Regulation No. 11 of 2026 instead expressly requires packaging materials that come into direct contact with food to meet both overall and specific migration limits. These are defined as follows: Overall migration: The total quantity of all substances that migrate from the packaging, regardless of whether the substances are hazardous or nonhazardous to health. Specific migration: The quantity of a particular identified substance known to be hazardous to health that migrates from the packaging. Stricter Limits on Heavy Metals The overall migration limit for plastic packaging remains unchanged under both regulations at 60 mg/kg or 10 mg/dm². However, the new regulation introduces significant changes to the regulation of heavy metals. Under the 2019 regulation, four heavy metals—lead, cadmium, chromium VI, and mercury—were subject to a single combined limit of 1 mg/kg. The 2026 regulation, however, requires each heavy metal to meet its own individual specific migration limit, adds arsenic as
Read More
September 7, 2026
Indonesia’s Constitutional Court (Mahkamah Konstitusi) has reinstated a key provision limiting pharmaceutical patent protection, signaling a renewed commitment to balancing patent rights with public access to medicines. In its ruling to Case No. 255/PUU-XXIII/2025, the court partially granted a petition for judicial review of Law No. 65 of 2024, which had amended the country’s Patent Law, and ordered the restoration of a provision that had excluded certain pharmaceutical inventions from patentability. The decision took effect immediately upon its pronouncement at the court’s plenary session on August 28, 2026. Background The petition challenged the removal of article 4(f) from Law No. 13 of 2016 concerning Patents (Patent Law), as amended by Law No. 65 of 2024. Article 4(f) had excluded from patentability certain inventions relating to new uses of known substances. The petitioners argued that removing this provision would open the door to patent protection for second medical use inventions and facilitate patent evergreening—practices that can extend exclusivity periods, delay generic market entry, and reduce public access to affordable medicines. The petitioners included several patient advocacy and public-interest organizations: the Indonesian Dialysis Patients Community Association, the Indonesian Association of Drug Abuse Victims (PKNI), the Indonesian Pulmonary Hypertension Foundation (YHPI), the Rekat Peduli Indonesia Foundation, and the Indonesian Positive Women’s Association (IPPI), along with the Indonesia for Global Justice Association and four individual petitioners. The petitioners also challenged the constitutionality of the phrase “interested party” in article 70(1) of the Patent Law, arguing that it should be construed expressly to clarify who has standing to appeal a decision to grant a patent before the Board of Patent Appeal, and to allow a broader range of parties—such as patent holders, licensees, consumer organizations, prosecutors, aggrieved third parties, and others who may suffer direct or indirect harm from the grant of a patent—to
Read More