You are using an outdated browser and your browsing experience will not be optimal. Please update to the latest version of Microsoft Edge, Google Chrome or Mozilla Firefox. Install Microsoft Edge

December 6, 2018

Case Studies on Board of Patents’ Decisions Relating to Product Design Novelty

Subscribe to Updates
Informed Counsel

To be eligible for a design patent under Thai law, a product design must be novel and industrially applicable. A product design is considered to be novel if, before the application is filed, the design:

  • is not widely known or used in Thailand;
  • is not disclosed or described in Thailand or another country;
  • is not published; and
  • does not sufficiently resemble any previous designs to be considered an imitation.

These criteria, stipulated by law, are deliberately straightforward so that unpatentable product designs can be easily weeded out. However, when a design patent application is filed for a design that is similar in appearance to a publicly available product, it can be challenging to assess whether the new application will be granted. This article takes an in-depth look at two cases that fall under this scenario, the reasoning that the Board of Patents (BOP) adopted in addressing them, and the ultimate decisions that it reached.

Case Studies

On June 27, 2018, the BOP ruled that a design for roofing plates was novel, compared to four prior art designs for existing patents.

The BOP compared the new design to the four existing designs in order to determine whether the new design was recognizably different. In deliberating the case, the BOP found that the new design featured a roof tile with a wave pattern in which the upper and lower waves were the same size and appearance. Additionally, the two-stripe patterns, oriented in a perpendicular direction to the waves and located at both ends of the roof tile, were held to be a unique feature. These combined characteristics passed the novelty test and led the BOP to render the design as novel compared to the existing patents.

Approximately one month after the decision in the roofing plates case was rendered, the BOP dismissed a design patent application for a screw cap for a jar on the grounds that it was substantially similar to a prior art design for an existing patent. 

 
       
According to the BOP, the new product design comprised a round cap with a flat top and bottom and convex vertical strips along the outer edge. In addition, a vertical cross-section of the cap featured a flat surface with a groove. Ultimately, these elements were found to be substantially similar to the prior art design. Although the grooves of the new design were wider and deeper than those of the prior art, these differences were insufficient for the design to be considered novel.

Conclusion   

In the deliberation of both cases, the BOP considered each element of the new product design, and the overall appearance, and compared them to prior designs. If they found that the combined elements created an overall appearance that was sufficiently different from the previous design, then the new product design was deemed to be novel.   

The BOP’s decisions on these two cases make it clear that, when comparing prior art designs to the design in a new application, the focus goes beyond merely identifying unique parts. The BOP also pays considerable attention to the cohesiveness of the overall appearance of the product. As shown in the second case, a design will not be considered as novel if it is substantially similar to existing designs in overall appearance. However, individual elements can help to distinguish the overall appearance of a design from other existing designs, and thus make it patentable.    

One practical upshot of this is that it is prudent to point out all unique and unifying elements of a design when filing a response to an office action or appeal to the BOP regarding the novelty of a product design. This strategy can be very useful in successfully registering a challenged application.

Download Full Article
Related Professionals

Practices

Intellectual Property

Location

RELATED INSIGHTS​ 

September 30, 2026
Packaging is a valuable commercial asset that helps consumers identify and distinguish products through their shape, colors, graphics, labels, and overall presentation. Obtaining legal protections for these assets is thus an important step. Businesses entering into or operating in the Myanmar market should assess whether trademark protection, industrial design protection, or both provide the strongest IP strategy for these features. The country’s Intellectual Property Department (IPD) under the Ministry of Commerce now administers trademark and industrial design registrations since Myanmar’s modernization of its intellectual property framework through the enactment of four key IP laws in 2019. Trademark Protection for Packaging Under the Trademark Law 2019, a “mark” is any visually perceptible sign, including words, names, letters, numerals, figurative elements, color combinations, or combinations of these signs, capable of distinguishing one undertaking’s goods or services from another’s. Trademark protection may therefore extend to certain elements of product packaging that function as source identifiers. Depending on their presentation and distinctiveness, packaging elements such as brand names, logos, labels, configurations, color combinations, and three-dimensional (3D) shapes may qualify for trademark protection. However, under the current practice of the IPD and its available examination guidelines, the packaging and  trade dress (including product get-up) are not expressly recognized as separate registrable subject matter in Myanmar. Under the Trademark Law 2019, trademark infringement—including unauthorized use of a registered mark on packaging—may give rise to civil remedies, including injunctions and damages, as well as criminal penalties. A 3D mark may protect packaging shape or configuration if it has acquired distinctiveness through use and consumers associate it with the relevant products. However, a shape dictated by a functional or technical purpose is ineligible for registration. Registration of a 3D mark may be renewed indefinitely for successive ten-year periods, subject to compliance with renewal requirements. Industrial Design Protection
Read More
September 30, 2026
Under Thailand’s Patent Act B.E. 2522 (1979), any person may raise the invalidity of a patent as a matter of defense. However, the right to initiate court proceedings to cancel a patent is reserved exclusively for an “interested person” or the public prosecutor. This distinction between merely challenging validity and initiating judicial revocation proceedings has given rise to a significant body of Supreme Court (Dika) jurisprudence interpreting who qualifies as an “interested person” under the Patent Act. Statutory Framework Section 54 of the Patent Act provides that any invention patent granted not in compliance with the patentability requirements will be invalid, and that a petition to cancel such a patent may be submitted to the court by any “interested person” or the public prosecutor. Section 64 mirrors this provision for design patents, and section 65 novies extends the same framework to petty patents. However, none of these provisions defines the term “interested person,” leaving its interpretation to the courts. Supreme Court Interpretation The Thai Supreme Court has developed a consistent body of case law establishing that an “interested person” must be someone directly affected by the existence of the patent—not simply any member of the public. In 1989, the court found (Dika No. 2670/2532) that a party whose intended use of the patented technology was still in a preparatory stage—before actual manufacturing had commenced—did not qualify as an interested person. However, in 2009 the Supreme Court further elaborated  (Dika No. 2906/2552) that an interested party is one whose rights to utilize the invention are restricted by virtue of the patent, such as a manufacturer or producer whose operations are directly impacted by the patentee’s exclusive rights. In the 2008 case of T.M. Grating Steel Co., Ltd. v. Billion Mass Industry Co., Ltd. (Dika No. 974/2551), where the plaintiff had
Read More
September 24, 2026
Vietnam is implementing and developing a broad package of regulatory reforms that could reshape how IP, data, digital platforms, and product authenticity are regulated and enforced. Several of the key measures have been led by the Ministry of Public Security in its legislative and administrative capacity, as part of a broader government effort. The core reform package consists of four key legal instruments: proposed amendments to the Criminal Code, a proposed new Data Security Law, a draft Decree on Product Identification, Authentication and Traceability, and the newly enacted Decree No. 330/2026/ND-CP. These instruments include rules on criminal enforcement, data security, electronic identification, product identification and traceability, administrative violations, and cybersecurity sanctions. Combined, these measures will affect copyright enforcement, industrial property rights, trade secrets, AI training data, product provenance, online takedowns, valuation of counterfeit goods and electronic evidence. It is worth noting that, in addition to strengthening criminal penalties for IP crimes, Vietnam’s emerging regulatory framework increasingly treats infringement, data misuse, product authentication, and platform-enabled violations as interconnected regulatory and enforcement challenges. For rights holders and foreign investors, this could mean stronger tools against counterfeiting and online infringement, but also more compliance obligations around data, traceability, AI, platform controls and government-facing reporting. Expansion of Criminal IP Enforcement Proposed amendments to Article 225 of the Criminal Code would expand criminal copyright exposure beyond reproduction and distribution to cover large-scale commercial public performance and online communication of works, phonograms and video recordings. This is important because piracy is increasingly about streaming, unauthorized communication, and platform access models rather than physical copying. Aggravated copyright infringement could be subject to up to 10 years in prison for individuals and fines of up to VND 6 billion (about USD 228,300) for commercial legal entities. The amended Article 226 would expand criminal industrial property liability beyond
Read More
September 21, 2026
Thailand’s first-to-file trademark system has a serious vulnerability: it lacks both an explicit mechanism for refusing bad-faith registrations and any means of invalidating them in court after the five-year limitation period has expired. While brand owners worldwide confront trademark squatting, Thailand’s statutory silence stands out, particularly in light of AIPPI’s 2017 Resolution Q249, which recommended that every jurisdiction provide clear tools to address bad faith at all stages of the trademark lifecycle. Nearly a decade later, Thailand has yet to act. This article proposes a concrete reform blueprint, drawing on the legislative models of China, the United Kingdom, and the European Union. The Statutory Gap Under the Thai Trademark Act B.E. 2534, no provision expressly authorizes examiners to reject an application on grounds of bad faith. Section 8(10) addresses well-known marks but offers no relief where the targeted mark lacks well-known status. Practitioners have resorted to Section 8(9)—which bars marks “contrary to public order, morality, or public policy”—as a workaround. However, this provision was designed to address the characteristics of the mark itself, not the applicant’s intent. Thai Supreme Court decisions have split on whether it can reach bad-faith conduct, creating persistent legal uncertainty. The gap extends beyond examination. Civil actions to cancel a bad-faith registration must be brought within five years—a deadline that frequently expires before foreign brand owners discover the squatted mark. Cancellation through the Board of Trademarks remains available but is slow, costly, and subject to court appeal, leaving bad-faith registrations in force during protracted proceedings. The system effectively rewards squatters and penalizes legitimate owners. Lessons from International Best Practices Several major jurisdictions have already closed this gap. China’s 2019 amendment to Article 4 of the Trademark Law introduced an absolute ground for refusal: “bad faith trademark applications without intent to use shall be rejected.” Bad
Read More