You are using an outdated browser and your browsing experience will not be optimal. Please update to the latest version of Microsoft Edge, Google Chrome or Mozilla Firefox. Install Microsoft Edge

October 3, 2019

Vietnam Joins the Hague Agreement and Prepares to Amend Its IP Law

Subscribe to Updates

On October 1, 2019, Vietnam filed an instrument of accession to join the Hague Agreement Concerning the International Registration of Industrial Designs (Geneva Act of July 2, 1999). The Hague Agreement will officially take effect in Vietnam on January 1, 2020, three months after the filing date of the instrument.

Certain provisions of Vietnam’s Law on Intellectual Property (IP Law) and its guiding legislation will need to be amended or updated to be compatible with the Hague Agreement, as well as other recently joined or signed treaties like the EU-Vietnam Free Trade Agreement (EVFTA). While waiting for these amendments, Vietnam has announced that the provisions of the Hague Agreement will be directly applied for both international design applications designating Vietnam and international design applications originating from Vietnam.

In mid-September the Ministry of Science and Technology (MOST) also posted for public comments a draft proposal for amendment and supplementation of the IP Law, including some provisions that will facilitate applicants of international applications under the Hague Agreement. It is expected that the draft amended IP Law will be finalized and submitted to the National Assembly for approval in 2021.

Among the changes proposed in the most recent draft are the following matters related to patent and design.

PATENT

1. Assessment of novelty

Under current provisions, “an invention shall be considered novel if it is not publicly disclosed by use, by means of a written description, or in any other form inside or outside the country before the filing date of the patent application for invention or before the priority date if the application has a priority right.”

Accordingly, the scope of documents for assessment of novelty does not include a patent application for invention with an earlier filing date but published on or after the filing date of the newer application, because it has not yet been “publicly disclosed.” The draft proposal, following the practice of many other countries, includes this document as a basis for assessment of novelty.

2. Security control procedures

The issue of security control (first filing/foreign filing license) is stipulated in Decree No. 122/2010/ND-CP. The MOST proposes to move this provision into the IP Law and limit security control to technical fields affecting national security and defense.

However, in accordance with the current provisions, to file an application outside of Vietnam, an applicant first has to wait until six months after filing his/her application in Vietnam; if there is no notification from the state authorities regarding national defense and security during that six-month period, the application can be filed abroad. There is no mechanism in the draft proposal for a license to file applications abroad any earlier. In addition, many terms in the current provisions have not been concretized. It is hoped that such issues will be addressed and clarified in the final version of the amended law.

3. Grounds for patent invalidation

Currently, there are only two grounds for invalidation of a patent:

(i) The applicant had no right to file the application, or

(ii) The application did not meet requirements of novelty, inventive step, or industrial applicability.

The MOST proposes supplementing three additional grounds:

(iii) The claim set extends beyond the disclosure in the description as originally filed;

(iv) The specification does not disclose sufficiently to the extent that such invention can be carried out by a person skilled in the art; and

(v) A patent application for invention relating to a genetic resource or traditional knowledge fails to disclose or incorrectly discloses the genetic resource or traditional knowledge in the application.

These additional grounds are common in other countries, though the wording of ground (iii) would be more in line with international standards if it was changed to “the subject-matter of the patent extends beyond the content of the application as originally filed.”

INDUSTRIAL DESIGN

1. Specification of industrial design application

Currently, a specification is a mandatory document for an industrial design application. These specifications have numerous requirements as to their contents, making it difficult for applicants to prepare them and also requiring great efforts from the Intellectual Property Office to issue office actions objecting to specifications that fail to meet the requirements. Meanwhile, these specifications do not have much actual effect in determining the design. It is generally understood that the protection scope of a design is determined by the drawings, and there are still questions about whether a specification is truly relevant to the protection scope. The MOST proposes to amend the law to no longer require a specification to be submitted with a design application.

In addition, the MOST also proposes including a provision allowing applicants to submit a description as a reference. This would make it easier to determine the design, while clearly stating that such description does not serve as a basis for determining the protection scope of the design.

2. Postponement of publication of industrial design application

Sometimes an applicant will wish to postpone the publication of an industrial design application, to avoid the design being copied by a third party before the product is actually put into production. Under current provisions, such postponement is not allowed. The MOST proposes to amend the law to allow the postponement of publication. This will facilitate applicants who file an international application designating Vietnam under the Hague Agreement and wish to postpone its publication.

3. Assessment of novelty and originality for industrial design of component

The EU-Vietnam Free Trade Agreement (EVFTA) signed on June 30, 2019, contains the following provisions on the criteria for assessing the novelty and originality of an industrial design of a component of a complex product:

(i) The component must remain visible during normal use of the product;

(ii) The visible features must meet the requirements of novelty and originality; and

(iii) “Visible” means “seen by user (consumer)” of the product.

As these provisions are not directly specified in the current law of Vietnam, the MOST proposes to include them in the amended law.

POSSIBLE ADDITIONAL AMENDMENTS

Though the draft amended IP Law includes a number of positive advances, some issues remain conspicuously absent, including the following:

Patents for use inventions – As a member of the WTO, Vietnam provides patent protection for pharmaceutical inventions. However, use inventions, such as medical use inventions, are controversially not protected. The MOST admits that the protection of use inventions needs to be considered; however, no proposal to amend the law has yet been raised. If use inventions are not protected, this could check the development of the pharmaceutical sector in Vietnam, especially for Vietnamese companies.

Protection of partial designs – The current provisions require seven basic views to be filed for a design application, and partial designs (designs of parts of a product which can only be separated from the product by breaking the product) are not patentable. Accordingly, design protection in Vietnam is relatively narrow. The protection of partial designs would make Vietnamese law more compatible with the Hague Agreement.

It is hoped that, following the public comments, additional provisions addressing these issues and others will be included in the official proposal submitted to the government.

Related Professionals

Practices

Intellectual Property

Location

RELATED INSIGHTS​ 

August 27, 2026
Franchising in Thailand has matured into a sizeable commercial sector, but the rules governing franchisor–franchisee relationships remain scattered across general legislation rather than consolidated in a dedicated franchise statute. In this environment, the decisions of the Trade Competition Commission of Thailand (TCCT) have emerged as valuable practical guidance. Thailand follows a civil-law system in which judicial and administrative decisions do not create binding precedent; however, past rulings are nonetheless influential. This article examines the most instructive recent TCCT decisions and distills the practical compliance considerations for franchisors and franchisees operating in Thailand. Postcontract Changes: Justified or Unfair? A recurring issue is whether a franchisor may alter the terms of engagement after contract execution. The TCCT has established that midterm modifications are not inherently unfair; the determinative factors are whether there was a reasonable business justification, adequate advance notice, and a transparent process. In a 2023 coffee franchise matter, for instance, the TCCT declined to find a violation where a franchisor increased raw material prices, noting the increase had been communicated in advance and supported by demonstrable cost pressures. A bubble tea franchise matter reinforces this principle. The TCCT found that postcontract mandatory purchases of branded syrup and flavorings were justified, as the agreement reserved the franchisor’s right to modify product requirements, the materials were sold at or below market prices, and the branded ingredients possessed distinctive qualities deemed essential to franchise quality. The complaint was dismissed, with the additional requirements characterized as a legitimate measure to preserve brand consistency. Considered together, these decisions indicate that post‑contract modifications will be evaluated against three criteria: (1) whether there is a legitimate business rationale, (2) whether adequate advance notice was provided, and (3) whether franchisees were treated equitably throughout the transition. Discriminatory Treatment: Are Renewals and Information Equal? A 2024 automotive dealership
Read More
August 20, 2026
As part of its membership in Lex Mundi, Tilleke & Gibbins has released the latest edition of its Guide to Doing Business in Thailand, providing an overview of the legal, regulatory, and commercial considerations for companies establishing or expanding operations in Thailand. The 2026 edition offers practical insight into the country’s business environment, investment framework, and operational requirements. The guide covers a wide range of topics relevant to foreign and domestic investors, including: Investment incentives and promotion schemes Financial facilities and banking regulations Exchange controls and money transfers Import and export regulations Business structures and incorporation options Requirements for establishing a business Operational and compliance considerations Business cessation and insolvency procedures Employment and labor laws Taxation Immigration and visa requirements Prepared by Tilleke & Gibbins lawyers across multiple practice areas, the publication outlines key aspects of doing business in Thailand, including foreign investment restrictions, regulatory compliance obligations, corporate structures, employment requirements, and recent legal and economic developments affecting investors. The publication forms part of Lex Mundi’s Country Guides series, a global collection of jurisdiction-specific reference materials prepared by member firms around the world. Together, these guides help companies evaluate opportunities, compare regulatory environments, and plan international business activities across multiple markets. The full Guide to Doing Business in Thailand 2026 is available through the button below.
Read More
August 13, 2026
Modern agricultural machinery is no longer purely mechanical but instead technology dependent. Modern tractors, harvesters, and other farm equipment increasingly incorporate embedded software, electronic control units, sensors, and digital diagnostic systems. While such technologies enhance efficiency, productivity, and precision farming, they also affect the manner of equipment repair and maintenance. As a result, farmers and independent repair providers may have little practical choice but to rely on authorized dealers, even for routine maintenance and repairs. Section 36 of Thailand’s Patent Act reflects the principle that the authorized sale of a patented invention usually exhausts the exclusive right of the patent owner over the specific product. This means that upon legal sale of the patented product, it can typically be used or resold without further authorization from the patent holder. This principle is relatively straightforward when applied to traditional mechanical equipment. Ownership of a machine ordinarily carries with it the practical ability to diagnose faults, replace worn parts, and restore the equipment to working order. Modern agricultural machinery, however, increasingly depends on embedded software, proprietary diagnostic systems, firmware updates, and other digital resources that may remain under the control of the manufacturer or patent holder. This tension lies within the “right to repair” debate. In the United States, on July 8, 2026, the Federal Trade Commission and five states announced a settlement with Deere & Company resolving allegations that Deere had unlawfully restricted farmers’ and independent repair providers’ ability to repair their equipment. Under the terms of the settlement, for the next ten years, Deere must provide repair resources, including software capabilities, on terms equivalent to those provided to authorized dealers. The Deere settlement highlights that the nature of ownership is changing, but legal concepts have not kept pace. Traditional patent-law concepts, including patent exhaustion, were developed with physical products
Read More
August 10, 2026
Thailand has finalized its social media KYC (“know your customer”) rules under Notification of the Electronic Transactions Commission on Measures to Prevent Technological Crimes for Social Media Service Providers (No. 2), which was published in the Government Gazette on May 5, 2026, and will take effect on November 1, 2026. While an early draft of the notification proposed requiring social media platforms to arrange identification of every user account, the final notification is significantly more targeted, focusing on paid online advertising and advertiser identity verification. Though the regulatory initiative primarily aims to combat online fraud and technology-related crimes, it also has important consequences for intellectual property enforcement, because the verified platform records that will be generated under the new requirements can help IP rights holders to identify anonymous online infringers. Key Regulatory Mandates The notification requires social media service providers to verify the identity of advertisers before their paid advertisements are published and disseminated in Thailand through social media, regardless of whether the advertising fees come from the advertisers or third parties. Verification of an advertiser is valid for one year, after which verification would have to be performed again before the platform could publish additional paid advertisements from the advertiser. Permitted verification methods are specified under the notification. A platform may verify an advertiser by checking identity evidence and confirming the connection between the advertiser and that identity evidence, with the notification giving facial comparison against certain government-issued identity documents as an example. Alternatively, platforms may verify advertisers through a digital identity verification and authentication system with an identity-proofing assurance level not lower than the level prescribed by Thailand’s Electronic Transactions Commission. The notification further requires platforms to retain only the advertiser’s information necessary to identify the advertiser, beginning from the start of the advertising activity and for
Read More