You are using an outdated browser and your browsing experience will not be optimal. Please update to the latest version of Microsoft Edge, Google Chrome or Mozilla Firefox. Install Microsoft Edge

July 7, 2023

New Definition of Industrial Design in Vietnam’s Amended IP Law Needs Clarification

Subscribe to Updates

The amended IP Law adopted by the National Assembly of Vietnam on June 16, 2022, which took effect on January 1, 2023, revises the definition of an industrial design, which had been unaltered since the introduction of the first IP Law in 2005. This amended definition will certainly have a significant influence on the understanding, application, and interpretation of regulations on protection of industrial designs in Vietnam. The revised definition reads as follows, with the new additions in bold (no words were removed from the old definition):

Article 4.13:

Industrial design means the external appearance of a product or a component for assembly of a complex product represented in shapes, lines, colors, or any combination thereof, and visible during the utilization of the product or complex product.

This definition can be separated into two groups of objects:

Group 1

Industrial design means:

1.1: the external appearance of a product

1.2: represented in shapes, lines, colors, or any combination thereof, and

1.3: visible during the utilization of the product.

Group 2

Industrial design means:

2.1: the external appearance of a component for assembly of a complex product,

2.2: represented in shapes, lines, colors, or any combination thereof, and

2.3: visible during the utilization of the complex product.

In principle, Group 2 must include at least one object that is not covered in Group 1, because if Group 2 is completely covered by Group 1, it would be unnecessary to revise the definition to reflect the “new” group of objects. We will consider the above definition in such spirit.

 

Group 1 Objects

Under the revised definition, conditions 1.1 and 1.2 are unchanged, and condition 1.3 is added. Condition 1.3 essentially reflects the exclusion already specified in Article 64.3 of the IP Law, i.e., “the external appearance of a product that is invisible during the utilization of the product is not registrable as an industrial design.” It can be understood that the addition of condition 1.3 serves only to bring the protection conditions for an industrial design into the definition (formerly, it was required to rely on both the definition and the exclusions to determine the scope of protection); it does not regulate condition 1.1 with regard to the external appearance of the product. We will discuss this condition further with regard to the Group 2 objects.

In summary, under the revised definition of an industrial design, the scope of Group 1 objects is basically unchanged from the former definition.

 

Group 2 Objects

The revised definition of an industrial design also refers to a new group of objects with conditions 2.1, 2.2, and 2.3.

Regarding condition 2.1, “the external appearance of a component for assembly of a complex product,” the term “component” is mentioned in Article 33.2.b of Circular 16/2016/TT-BKHCN (Circular 16): “Products are understood as items, tools, equipment, means, or components used to assemble or compose such products, manufactured by industrial or manual methods, with clear structure and function, and circulated independently.” The term “component” is thus not new, so it can be understood that Group 2 is not new, but only clarifies a “component for assembly of a complex product” to distinguish it from a “product.”

We can further consider the terms “component”, “assembly,” and “complex product”.

  • “Component”: Under Article 33.2.b of Circular 16, it is clear that the term “component” can itself be understood as a “product.” However, there is an opinion that by separating these two concepts in the definition of an industrial design, the term “component” refers to a component that by itself cannot create functions and uses of the complex product that it will be assembled into. If a component creates the functions and uses of a complex product, it becomes an independent “product,” which is already covered in Group 1. We also note that this approach is based on the validity of Article 33.2.b of Circular 16. If new circulars promulgated to guide the amended IP Law change this article, this approach should be reconsidered.
  • “Assembly”: There is an opinion that “assembly” is only used for tangible products, which can be manipulated, handled, and operated directly by manual or mechanical means. Thus, in addition to the independent circulation requirement, this new definition provides an additional basis for excluding non-tangible products/components such as typefaces, graphical user interfaces (GUI), etc.For tangible products/components, what does “assembly” mean? If it is understood in a broad sense, which means linking, combining, connecting, attaching, bonding, coupling, etc., between components—including not only mechanical connections but also the use of adhesives, intermediate/connecting components, 3D printing of materials, etc., and not only direct assembly but also indirect assembly through one or more intermediate/connecting components—then the scope of Group 2 will be very broad. However, if the term “assembly” is only understood in a narrow sense, meaning mechanically and directly joined components, Group 2 will be much smaller. There is also an opinion that “assembly” refers to the case where a component, once assembled, cannot be disassembled without breaking the structure of other components or the complex product. In this case, the scope of Group 2 will be much narrower still, and the addition of Group 2 is to provide an additional basis for excluding partial designs that cannot be easily removed from the main product.

    The term “assembly” is therefore also a very important term in understanding the scope of Group 2, and it is clear that more guidance and expertise is needed to explain how to understand and use this term.

  • “Complex product”: According to the above analysis, the “complex product” itself is covered in the “product.” Therefore, in this context, the addition of the term “complex product” is probably only to clarify or define the “component”, and the consideration of a “complex product” should be associated with the consideration of a “component”. However, there is also a need to define more clearly the connotations and externalities of the term “complex product” included in the new definition of an industrial design.

Condition 2.2, like condition 1.2, is unchanged in comparison with the former definition of an industrial design. However, in the context of referring to “a component for assembly of a complex product”, condition 2.2 should be understood to refer to the shapes, lines and colors of the “component,” and not the “complex product.”

Condition 2.3, as discussed above with regard to condition 1.3, appears to also be the addition of the exclusion provided in Article 64.3 of the IP Law to the new definition of an industrial design, with the term “complex product” adjusted to suit the new Group 2 objects. However, this condition is more specific and explicit for the case of “a component for assembly of a complex product” because there are many cases in which a complex product is made from the assembly of a component with other components, and when the complex product is utilized, the appearance features of the original component are not always visible. This condition thus excludes these cases, and is more explicit and specific for Group 2.

Therefore, according to the revised definition of an industrial design, the conditions for Group 2 include: condition 2.1, which is added; condition 2.2, which is unchanged; and condition 2.3, which adds the exclusion provided in Article 64.3 to the definition of an industrial design. Therefore, it seems that Group 2 is not new, but only clarifies a “component for assembly of a complex product” to distinguish it from a “product.”

In particular, the new terms “component”, “assembly”, “complex product” and “utilization” with regard to Group 2 should be understood and explained closely with each other. By analyzing these terms, we also find that the new definition of an industrial design seems to clarify and provide more grounds for excluding non-tangible designs such as typefaces and GUI, as well as partial designs. However, because there can be many different interpretations of the above terms, there should be more detailed explanations, and the subordinate legislation should also be amended to enforce the new provisions.

 

Conclusion

The amended IP Law received much positive feedback from those in the field, and is progressive legislation containing many necessary and reasonable changes for the IP environment of Vietnam. However, there are still some ambiguities in the new definition of an industrial design that need more guidance and expertise on how it should be understood and applied.

Currently, with the information from the dissemination and exchange sessions on how to apply this amended IP Law, we still do not have a clear and unified understanding of the terms “component”, “assembly”, “complex product” and “utilization,” which are closely related to the understanding and the scope of protection of the groups of objects added in the new definition of an industrial design. We hope that with the promulgation of further decrees and circulars, the above terms and the scope of protection of the protected subject matters will be clarified.

Related Professionals

Practices

Intellectual Property

Location

RELATED INSIGHTS​ 

December 20, 2024
With intellectual property playing an ever-increasing role in economic development, the need to harness, promote, and protect ASEAN innovation remains urgent as integration progresses. Among its objectives, the ASEAN Economic Community aims to transform the region into a hub of innovation and competitiveness and ensure that the region remains an active participant in the international IP community. With ASEAN member states increasing IP generation and further committing to global IP regimes, the region is increasingly looking toward sophisticated IP ownership and holding structures. IP Holding Companies ASEAN-based companies continue to centralize ownership of their IP assets in offshore holding and licensing vehicles—an approach multinational companies headquartered elsewhere have been using for a number of years. IP-intensive companies look to locate their IP portfolios in low-tax jurisdictions with strong IP registration and protection laws. The company then licenses the IP to operating companies in the group or to third-party licensees, franchisees, agents, distributors, and other partners in return for royalties or license fees. These special-purpose vehicles are typically referred to as IP holding companies. IP holding companies are popular because they can help corporations minimize tax, gain tax benefits or concessions, protect IP from bankruptcy or other claims against the parent company, and focus management attention on the IP portfolio as an income generator. Tax and IP Holding Companies Tax is the primary reason most companies park their IP in separate IP holding vehicles. Sometimes, companies choose to establish their IP holding company in a no-tax, low-tax, or preferred-tax jurisdiction close to their home country. The selected jurisdiction should also be a country with a large and well-established tax treaty network. Double taxation treaties are key considerations in jurisdiction shopping. If the IP assets need to be pledged as security for future borrowings or if they are to be included
Read More
December 20, 2024
Closing out the year, Thailand’s Department of Intellectual Property (DIP) has gifted green innovators with a chance to take a faster route for examining their patent and petty patent applications under the “Target Patent Fast-Track” program. This route prioritizes environmentally sustainable inventions, and significantly accelerates the preliminary and substantive examinations of selected applications at no additional official fee. The program was publicly announced on December 2, 2024, in the DIP Notification on the Expansion of Technological Fields under the Target Patent Fast-Track Program, which took effect on December 15, 2024. The expedited process is open to both Thai and foreign applicants, provided the requirements in the notification are met. Under the fast-track program, a first office action for qualifying applications can be expected within 6 months during the preliminary examination stage. These applications will also be issued a first office action within just 12 months in the substantive examination period after publication. The DIP begins accepting formal requests for selection to participate in the program from January 1, 2025, onward. Each applicant can submit only one application per fast-track patent program per month, as selected applications cannot belong to the same applicant. No more than 10 applications per month will be chosen to participate in the fast-track route, with the results being announced on the 5th of every following month. To be eligible for selection, applications must comply with all the fast-track requirements specified in the recent DIP notification, particularly: The patent or petty patent application must have been filed with the DIP for at least three months, or a substantive examination request has already been filed in the case of patent applications. Each application must contain no more than 10 claims throughout its participation in the program. The application must be electronically filed in Thailand first or through
Read More
December 18, 2024
The EU-Thailand Free Trade Agreement is drawing a lot of interest as the fourth round recently concluded in Bangkok. Despite negotiations starting in 2013, there was a ten-year pause before we saw the first round of negotiations end in September 2023. The initial plan was for four rounds of negotiations, with the free trade agreement (FTA) finalized in 2025. However, following the fourth round it is clear that the negotiations are still ongoing. Now, the question is: how much closer are the EU and Thailand to concluding their FTA? The EU initially submitted 13 chapter proposals for the FTA, followed by a further 12, and these became the springboard for the negotiations. Given the complexity of agreeing on an accord of this size, there will probably be additional proposals submitted in 2025. These chapters have seen sector-specific negotiation groups formed, and although it has been difficult to truly gauge the status, steady progress has been made in each. Arguably one of the biggest points of discussion pertains to the customs process for imports and exports. Both sides aim to align their practices in relation to rules of origin and custom rates, with preferential tariff treatments offered to goods originating from Thailand and the EU, as well as talks of eliminating or reducing relevant taxes. The desire for a faster customs clearance can be seen in EU proposals for clearance of goods on arrival. Although there has been progress in agreeing to a more simplified customs process, more work needs to be done before we hear news of the agreed-upon fees and charges, or confirmation of what goods would be allowed temporary admission. When we consider customs clearance, it is important to also examine what this FTA could mean for rightsholders. One piece of good news is that it appears
Read More
December 9, 2024
Cambodia’s Law on Seed Management and Plant Breeder’s Rights was enacted in 2008, but it was not until recently that new plant varieties could successfully be registered for protection in the country. Although the law has been in place for some time, recent developments confirmed the application process and a schedule of charges for the registration of new plant varieties. With these developments, breeders have been able to register their new plant varieties in Cambodia since March 1, 2024. Applicants for new plant variety protection must be Cambodian nationals, foreign nationals domiciled in Cambodia, or permanent residents of either a country that is a contracting party to the International Union for the Protection of New Varieties of Plants (UPOV) Convention or a country with which Cambodia has signed a memorandum of understanding on plant variety protection. Applicants can also claim a priority date from the first application for the same plant variety filed in any contracting party of the UPOV Convention within 12 months of the earliest application’s filing date. To be eligible for protection, new plant varieties must satisfy the following criteria: Novelty: A variety is considered “new” if, at the date of filing the application for new plant variety protection, it has not been sold, marketed, or otherwise disposed of others—by or with the consent of the breeder—for more than: One year for any plant variety in Cambodia; Six years for trees and vines or four years for all other plant varieties in countries besides Cambodia. Distinctiveness: A variety must be clearly distinguishable from any other existing varieties. Uniformity: A variety must be sufficiently uniform in its relevant characteristics. Stability: A variety must remain unchanged in its essential characteristics at the end of each cycle of propagation and in each generation. The last three criteria are often
Read More