You are using an outdated browser and your browsing experience will not be optimal. Please update to the latest version of Microsoft Edge, Google Chrome or Mozilla Firefox. Install Microsoft Edge

July 7, 2023

New Definition of Industrial Design in Vietnam’s Amended IP Law Needs Clarification

Subscribe to Updates

The amended IP Law adopted by the National Assembly of Vietnam on June 16, 2022, which took effect on January 1, 2023, revises the definition of an industrial design, which had been unaltered since the introduction of the first IP Law in 2005. This amended definition will certainly have a significant influence on the understanding, application, and interpretation of regulations on protection of industrial designs in Vietnam. The revised definition reads as follows, with the new additions in bold (no words were removed from the old definition):

Article 4.13:

Industrial design means the external appearance of a product or a component for assembly of a complex product represented in shapes, lines, colors, or any combination thereof, and visible during the utilization of the product or complex product.

This definition can be separated into two groups of objects:

Group 1

Industrial design means:

1.1: the external appearance of a product

1.2: represented in shapes, lines, colors, or any combination thereof, and

1.3: visible during the utilization of the product.

Group 2

Industrial design means:

2.1: the external appearance of a component for assembly of a complex product,

2.2: represented in shapes, lines, colors, or any combination thereof, and

2.3: visible during the utilization of the complex product.

In principle, Group 2 must include at least one object that is not covered in Group 1, because if Group 2 is completely covered by Group 1, it would be unnecessary to revise the definition to reflect the “new” group of objects. We will consider the above definition in such spirit.

 

Group 1 Objects

Under the revised definition, conditions 1.1 and 1.2 are unchanged, and condition 1.3 is added. Condition 1.3 essentially reflects the exclusion already specified in Article 64.3 of the IP Law, i.e., “the external appearance of a product that is invisible during the utilization of the product is not registrable as an industrial design.” It can be understood that the addition of condition 1.3 serves only to bring the protection conditions for an industrial design into the definition (formerly, it was required to rely on both the definition and the exclusions to determine the scope of protection); it does not regulate condition 1.1 with regard to the external appearance of the product. We will discuss this condition further with regard to the Group 2 objects.

In summary, under the revised definition of an industrial design, the scope of Group 1 objects is basically unchanged from the former definition.

 

Group 2 Objects

The revised definition of an industrial design also refers to a new group of objects with conditions 2.1, 2.2, and 2.3.

Regarding condition 2.1, “the external appearance of a component for assembly of a complex product,” the term “component” is mentioned in Article 33.2.b of Circular 16/2016/TT-BKHCN (Circular 16): “Products are understood as items, tools, equipment, means, or components used to assemble or compose such products, manufactured by industrial or manual methods, with clear structure and function, and circulated independently.” The term “component” is thus not new, so it can be understood that Group 2 is not new, but only clarifies a “component for assembly of a complex product” to distinguish it from a “product.”

We can further consider the terms “component”, “assembly,” and “complex product”.

  • “Component”: Under Article 33.2.b of Circular 16, it is clear that the term “component” can itself be understood as a “product.” However, there is an opinion that by separating these two concepts in the definition of an industrial design, the term “component” refers to a component that by itself cannot create functions and uses of the complex product that it will be assembled into. If a component creates the functions and uses of a complex product, it becomes an independent “product,” which is already covered in Group 1. We also note that this approach is based on the validity of Article 33.2.b of Circular 16. If new circulars promulgated to guide the amended IP Law change this article, this approach should be reconsidered.
  • “Assembly”: There is an opinion that “assembly” is only used for tangible products, which can be manipulated, handled, and operated directly by manual or mechanical means. Thus, in addition to the independent circulation requirement, this new definition provides an additional basis for excluding non-tangible products/components such as typefaces, graphical user interfaces (GUI), etc.For tangible products/components, what does “assembly” mean? If it is understood in a broad sense, which means linking, combining, connecting, attaching, bonding, coupling, etc., between components—including not only mechanical connections but also the use of adhesives, intermediate/connecting components, 3D printing of materials, etc., and not only direct assembly but also indirect assembly through one or more intermediate/connecting components—then the scope of Group 2 will be very broad. However, if the term “assembly” is only understood in a narrow sense, meaning mechanically and directly joined components, Group 2 will be much smaller. There is also an opinion that “assembly” refers to the case where a component, once assembled, cannot be disassembled without breaking the structure of other components or the complex product. In this case, the scope of Group 2 will be much narrower still, and the addition of Group 2 is to provide an additional basis for excluding partial designs that cannot be easily removed from the main product.

    The term “assembly” is therefore also a very important term in understanding the scope of Group 2, and it is clear that more guidance and expertise is needed to explain how to understand and use this term.

  • “Complex product”: According to the above analysis, the “complex product” itself is covered in the “product.” Therefore, in this context, the addition of the term “complex product” is probably only to clarify or define the “component”, and the consideration of a “complex product” should be associated with the consideration of a “component”. However, there is also a need to define more clearly the connotations and externalities of the term “complex product” included in the new definition of an industrial design.

Condition 2.2, like condition 1.2, is unchanged in comparison with the former definition of an industrial design. However, in the context of referring to “a component for assembly of a complex product”, condition 2.2 should be understood to refer to the shapes, lines and colors of the “component,” and not the “complex product.”

Condition 2.3, as discussed above with regard to condition 1.3, appears to also be the addition of the exclusion provided in Article 64.3 of the IP Law to the new definition of an industrial design, with the term “complex product” adjusted to suit the new Group 2 objects. However, this condition is more specific and explicit for the case of “a component for assembly of a complex product” because there are many cases in which a complex product is made from the assembly of a component with other components, and when the complex product is utilized, the appearance features of the original component are not always visible. This condition thus excludes these cases, and is more explicit and specific for Group 2.

Therefore, according to the revised definition of an industrial design, the conditions for Group 2 include: condition 2.1, which is added; condition 2.2, which is unchanged; and condition 2.3, which adds the exclusion provided in Article 64.3 to the definition of an industrial design. Therefore, it seems that Group 2 is not new, but only clarifies a “component for assembly of a complex product” to distinguish it from a “product.”

In particular, the new terms “component”, “assembly”, “complex product” and “utilization” with regard to Group 2 should be understood and explained closely with each other. By analyzing these terms, we also find that the new definition of an industrial design seems to clarify and provide more grounds for excluding non-tangible designs such as typefaces and GUI, as well as partial designs. However, because there can be many different interpretations of the above terms, there should be more detailed explanations, and the subordinate legislation should also be amended to enforce the new provisions.

 

Conclusion

The amended IP Law received much positive feedback from those in the field, and is progressive legislation containing many necessary and reasonable changes for the IP environment of Vietnam. However, there are still some ambiguities in the new definition of an industrial design that need more guidance and expertise on how it should be understood and applied.

Currently, with the information from the dissemination and exchange sessions on how to apply this amended IP Law, we still do not have a clear and unified understanding of the terms “component”, “assembly”, “complex product” and “utilization,” which are closely related to the understanding and the scope of protection of the groups of objects added in the new definition of an industrial design. We hope that with the promulgation of further decrees and circulars, the above terms and the scope of protection of the protected subject matters will be clarified.

Related Professionals

Practices

Intellectual Property

Location

RELATED INSIGHTS​ 

October 24, 2025
Thailand currently lacks a specific franchise act. Consequently, the legality of any franchise agreement is determined by its compliance with various existing laws, such as the Civil and Commercial Code, the Trademark Act B.E. 2534 (1991) (as amended), and the Unfair Contract Terms Act B.E. 2530 (1997). Thailand is a freedom-to-contract jurisdiction. This allows for a high degree of flexibility and autonomy in contractual arrangements, provided that the terms do not violate any laws or public policy and do not fall under the scope of unfair contract terms. Given this, the requirement for fairness in franchise agreement terms often leads to uncertainty, but decisions from the Trade Competition Commission of Thailand (TCCT) can provide guidance on whether specific contentious terms are in fact fair.  One issue worth examining in this light is the inclusion of terms on nonrefundable franchise fees and strict purchasing conditions. Franchise Fee: Unfair to Refuse Refund? Nonrefundable franchise fees represent a significant upfront investment for franchisees, often becoming a point of contention if the franchise relationship deteriorates or the franchisor ceases operations. Their fairness and enforceability are frequently scrutinized by regulatory bodies like the TCCT, highlighting the critical balance between contractual freedom and franchisee protection. Faced with one such case, the TCCT considered whether it was unfair for the franchisor to refuse to refund the franchise fee after the franchisor ceased operations.  The franchisee had entered into a service agreement on August 2, 2021, and begun operating on October 9, 2021. However, by November 21, 2023, the franchisee was notified that the system would be shut down for maintenance, and by December 26, 2023, the franchisor announced the cessation of operations due to financial losses. The franchisee then requested a refund of the franchise fee. Unfortunately for the franchisee, the TCCT found that the franchisor’s
Read More
October 23, 2025
Myanmar’s customs authorities have introduced new procedures allowing copyright holders to protect their intellectual property from infringing goods at the border. The Ministry of Finance and Revenue issued Notification No. 107/2025 on September 11, 2025, establishing rules and requirements for customs recordation under the Copyright Law of 2019. The notification includes eight official forms for copyright-related customs matters—three for applicants and five for the Customs Department. This was followed by Customs Department Announcement No. 1/2025, dated September 29, 2025, which details the security required for suspended goods. Customs recordation provides a proactive mechanism for rights holders to prevent importation of pirated works. By registering their works with the Customs Department, rights holders gain access to enhanced border enforcement measures, empowering customs officials to identify and intercept pirated goods before they enter the market. While copyright protection in Myanmar arises automatically under the Copyright Law of 2019, a registration certificate for copyright or related rights is required to apply for customs recordation. Customs Recordation Registered copyright and related rights holders can apply directly or through authorized legal representatives for customs recordation to prevent cross-border trade in pirated works. Applications must use the prescribed form and include all supporting documentary evidence specified in the form. The Customs Department will notify applicants within 15 days of receiving their application. Each recordation remains valid for two years from the date of acceptance and may be renewed for successive two-year periods by submitting a renewal application at least 30 days before expiration. Rights holders whose works are recorded must notify the Customs Department within five days of any amendment or withdrawal of information at the Intellectual Property Department. Suspension Orders Registered copyright and related rights holders can request a suspension order to prevent release of pirated goods into free circulation, regardless of whether they
Read More
October 3, 2025
In Thailand, the rise in online intellectual property infringement has prompted authorities to strengthen enforcement efforts, including the use of website-blocking orders under Section 20(3) of the Computer Crime Act B.E. 2560 (2017) (CCA). This provision authorizes the Ministry of Digital Economy and Society (MDES), with court approval, to block or remove computer data that constitutes a criminal offence under IP law. Since its implementation, the procedure has undergone several developments, which is an encouraging sign of progress. Website-blocking procedure In practice, website-blocking orders under Section 20(3) of the CCA are primarily used for copyright and trademark infringement. While such orders are legally applicable to patent infringement, their use remains challenging due to the difficulty of proving infringement through administrative procedures. The website-blocking procedure begins when an IP owner identifies online infringing content. For copyright infringement, which is considered a compoundable offence, the IP owner is required to first file a police report with the specialized police unit known as the Economic Crime Suppression Division (ECD) prior to filing the website-blocking application with the Department of Intellectual Property (DIP). For trademark infringement cases, the application can be filed directly with the DIP without a prior police report. The DIP reviews the evidence and, if infringement is confirmed, forwards it to the MDES for further consideration. If the case is deemed valid, the MDES requests a court order to block the infringing website. Once granted, the MDES notifies the internet service providers (ISPs) to block access to the specified website. Website blocking procedure in Thailand Recent advancements in website-blocking actions Seamless collaboration through digital integration. Thailand has made significant progress in digitizing its website-blocking procedures to improve efficiency and transparency. At present, all website-blocking applications and supporting evidence must be submitted in electronic format. These systems have significantly reduced processing
Read More
September 24, 2025
Online shopping in Thailand is more accessible than ever, with global platforms, local social media shops, and entertainment-driven social commerce enabling instant purchases. However, this convenience comes with rising concerns over digital intellectual property (IP) infringement, including counterfeit goods, pirated content, and unauthorized brand usage. At first glance, online platforms appear to offer quick solutions. Most major e-commerce sites, social media channels, and social commerce platforms provide “notice and takedown” systems, where IP owners can file complaints and request the removal of listings that infringe IP rights, such as trademarks and copyrights. These tools are certainly useful, as seeing a fake product vanish from a platform feels like progress. But the reality is less reassuring. The counterfeit goods themselves remain in warehouses, markets, or shops, ready to be resold. Sellers whose accounts are taken down often return within days under new names or accounts. In other words, a takedown is like cutting weeds without pulling out the roots: they always grow back. While notice and takedown tools are widely available and can be managed internally by most IP owners, their impact is often short-lived. IP owners seeking more effective, lasting protection need to take a more strategic and multilayered approach. The same applies to online piracy. Unauthorized streaming websites that offer free access to movies, TV shows, or sports broadcasts have become widespread in Thailand. To combat this, rightsholders can request website blocking under the Computer Crime Act, through the Ministry of Digital Economy and Society and the courts. Once requests are approved, internet service providers are ordered to block access to infringing sites. Blocking orders can be effective in disrupting large-scale piracy operations, but they also face limitations—pirate sites frequently reappear under new domains. Strategic Protection Whether the infringing material is physical counterfeit goods or intangible streaming content,
Read More