You are using an outdated browser and your browsing experience will not be optimal. Please update to the latest version of Microsoft Edge, Google Chrome or Mozilla Firefox. Install Microsoft Edge

July 7, 2023

New Definition of Industrial Design in Vietnam’s Amended IP Law Needs Clarification

Subscribe to Updates

The amended IP Law adopted by the National Assembly of Vietnam on June 16, 2022, which took effect on January 1, 2023, revises the definition of an industrial design, which had been unaltered since the introduction of the first IP Law in 2005. This amended definition will certainly have a significant influence on the understanding, application, and interpretation of regulations on protection of industrial designs in Vietnam. The revised definition reads as follows, with the new additions in bold (no words were removed from the old definition):

Article 4.13:

Industrial design means the external appearance of a product or a component for assembly of a complex product represented in shapes, lines, colors, or any combination thereof, and visible during the utilization of the product or complex product.

This definition can be separated into two groups of objects:

Group 1

Industrial design means:

1.1: the external appearance of a product

1.2: represented in shapes, lines, colors, or any combination thereof, and

1.3: visible during the utilization of the product.

Group 2

Industrial design means:

2.1: the external appearance of a component for assembly of a complex product,

2.2: represented in shapes, lines, colors, or any combination thereof, and

2.3: visible during the utilization of the complex product.

In principle, Group 2 must include at least one object that is not covered in Group 1, because if Group 2 is completely covered by Group 1, it would be unnecessary to revise the definition to reflect the “new” group of objects. We will consider the above definition in such spirit.

 

Group 1 Objects

Under the revised definition, conditions 1.1 and 1.2 are unchanged, and condition 1.3 is added. Condition 1.3 essentially reflects the exclusion already specified in Article 64.3 of the IP Law, i.e., “the external appearance of a product that is invisible during the utilization of the product is not registrable as an industrial design.” It can be understood that the addition of condition 1.3 serves only to bring the protection conditions for an industrial design into the definition (formerly, it was required to rely on both the definition and the exclusions to determine the scope of protection); it does not regulate condition 1.1 with regard to the external appearance of the product. We will discuss this condition further with regard to the Group 2 objects.

In summary, under the revised definition of an industrial design, the scope of Group 1 objects is basically unchanged from the former definition.

 

Group 2 Objects

The revised definition of an industrial design also refers to a new group of objects with conditions 2.1, 2.2, and 2.3.

Regarding condition 2.1, “the external appearance of a component for assembly of a complex product,” the term “component” is mentioned in Article 33.2.b of Circular 16/2016/TT-BKHCN (Circular 16): “Products are understood as items, tools, equipment, means, or components used to assemble or compose such products, manufactured by industrial or manual methods, with clear structure and function, and circulated independently.” The term “component” is thus not new, so it can be understood that Group 2 is not new, but only clarifies a “component for assembly of a complex product” to distinguish it from a “product.”

We can further consider the terms “component”, “assembly,” and “complex product”.

  • “Component”: Under Article 33.2.b of Circular 16, it is clear that the term “component” can itself be understood as a “product.” However, there is an opinion that by separating these two concepts in the definition of an industrial design, the term “component” refers to a component that by itself cannot create functions and uses of the complex product that it will be assembled into. If a component creates the functions and uses of a complex product, it becomes an independent “product,” which is already covered in Group 1. We also note that this approach is based on the validity of Article 33.2.b of Circular 16. If new circulars promulgated to guide the amended IP Law change this article, this approach should be reconsidered.
  • “Assembly”: There is an opinion that “assembly” is only used for tangible products, which can be manipulated, handled, and operated directly by manual or mechanical means. Thus, in addition to the independent circulation requirement, this new definition provides an additional basis for excluding non-tangible products/components such as typefaces, graphical user interfaces (GUI), etc.For tangible products/components, what does “assembly” mean? If it is understood in a broad sense, which means linking, combining, connecting, attaching, bonding, coupling, etc., between components—including not only mechanical connections but also the use of adhesives, intermediate/connecting components, 3D printing of materials, etc., and not only direct assembly but also indirect assembly through one or more intermediate/connecting components—then the scope of Group 2 will be very broad. However, if the term “assembly” is only understood in a narrow sense, meaning mechanically and directly joined components, Group 2 will be much smaller. There is also an opinion that “assembly” refers to the case where a component, once assembled, cannot be disassembled without breaking the structure of other components or the complex product. In this case, the scope of Group 2 will be much narrower still, and the addition of Group 2 is to provide an additional basis for excluding partial designs that cannot be easily removed from the main product.

    The term “assembly” is therefore also a very important term in understanding the scope of Group 2, and it is clear that more guidance and expertise is needed to explain how to understand and use this term.

  • “Complex product”: According to the above analysis, the “complex product” itself is covered in the “product.” Therefore, in this context, the addition of the term “complex product” is probably only to clarify or define the “component”, and the consideration of a “complex product” should be associated with the consideration of a “component”. However, there is also a need to define more clearly the connotations and externalities of the term “complex product” included in the new definition of an industrial design.

Condition 2.2, like condition 1.2, is unchanged in comparison with the former definition of an industrial design. However, in the context of referring to “a component for assembly of a complex product”, condition 2.2 should be understood to refer to the shapes, lines and colors of the “component,” and not the “complex product.”

Condition 2.3, as discussed above with regard to condition 1.3, appears to also be the addition of the exclusion provided in Article 64.3 of the IP Law to the new definition of an industrial design, with the term “complex product” adjusted to suit the new Group 2 objects. However, this condition is more specific and explicit for the case of “a component for assembly of a complex product” because there are many cases in which a complex product is made from the assembly of a component with other components, and when the complex product is utilized, the appearance features of the original component are not always visible. This condition thus excludes these cases, and is more explicit and specific for Group 2.

Therefore, according to the revised definition of an industrial design, the conditions for Group 2 include: condition 2.1, which is added; condition 2.2, which is unchanged; and condition 2.3, which adds the exclusion provided in Article 64.3 to the definition of an industrial design. Therefore, it seems that Group 2 is not new, but only clarifies a “component for assembly of a complex product” to distinguish it from a “product.”

In particular, the new terms “component”, “assembly”, “complex product” and “utilization” with regard to Group 2 should be understood and explained closely with each other. By analyzing these terms, we also find that the new definition of an industrial design seems to clarify and provide more grounds for excluding non-tangible designs such as typefaces and GUI, as well as partial designs. However, because there can be many different interpretations of the above terms, there should be more detailed explanations, and the subordinate legislation should also be amended to enforce the new provisions.

 

Conclusion

The amended IP Law received much positive feedback from those in the field, and is progressive legislation containing many necessary and reasonable changes for the IP environment of Vietnam. However, there are still some ambiguities in the new definition of an industrial design that need more guidance and expertise on how it should be understood and applied.

Currently, with the information from the dissemination and exchange sessions on how to apply this amended IP Law, we still do not have a clear and unified understanding of the terms “component”, “assembly”, “complex product” and “utilization,” which are closely related to the understanding and the scope of protection of the groups of objects added in the new definition of an industrial design. We hope that with the promulgation of further decrees and circulars, the above terms and the scope of protection of the protected subject matters will be clarified.

Related Professionals

Practices

Intellectual Property

Location

RELATED INSIGHTS​ 

January 30, 2026
Vietnam’s Intellectual Property (IP) Law, despite being amended in 2022, underwent another significant revision at the end of 2025. The latest amendment aimed to address five major policy objectives set by the Vietnamese government, including promoting innovation, digital transformation, and international integration. Among the most notable changes in the 2025 IP Law, which takes effect on 1 April 2026, is the expansion of industrial design protection under Article 4.13. The revised definition now includes partial designs and intangible designs, marking a transformative shift in Vietnam’s industrial design regime. This change has particularly significant implications on designs classified under Class 32 of the Locarno Classification—which covers graphic designs, logos, ornamentation, surface patterns, arrangements, and other intangible products. These designs, previously excluded from protection in Vietnam, are now recognized under the new legal framework. Background: Status of Class 32 Designs Before 2026 Th Intellectual Property Office of Vietnam currently applies the 13th edition of the Locarno Classification for industrial design filings. However, not all classes in this system have historically been eligible for protection. Under the 2022 IP Law, Class 32 designs were explicitly excluded based on the following legal grounds: Definition under Article 4.13 (2022 IP Law): “An industrial design is the external appearance of a product or a component for assembly into a complex product, expressed in shapes, lines, colors, or a combination thereof, and visible during the exploitation of the product’s utility or the complex product.” Product requirements under Article 21.2 of Circular 23/2023/TT-BKHCN: A product is defined as an object, a tool, a device, or means, manufactured by industrial or handicraft methods, with clear structure and function. A component for assembly into a complex product must be capable of independent circulation and detachable from the complex product. Based on these definitions, Class 32 designs, such as graphical
Read More
December 30, 2025
The Intellectual Property Office of Vietnam (IP Office), with support from the Japan International Cooperation Agency (JICA), is drafting additional annexes to its Guidelines for Patent Examination, focusing on the examination of patent applications in the pharmaceutical and biotechnology sectors. The new annexes are expected to be officially issued in early 2026 as Annexes III and IV, following the successful issuance in 2023 of Annexes I and II addressing computer program-related inventions. The IP Office recently organized a seminar to gather feedback on the draft annexes from intellectual property representatives, academic institutions, research institutes, and other interested parties, emphasizing its intention to receive further constructive opinions to refine the guidelines for pharmaceuticals and biotechnology. Why These Guidelines Matter Patent examination in Vietnam has traditionally relied on the Guidelines for Patent Examination issued under Decision No. 487/QD-SHTT (2010), recently supplemented by Annexes I and II. While these documents provide a solid foundation, they do not fully address practical challenges in examining pharmaceutical and biotech inventions, particularly issues related to clarity, sufficiency of disclosure, enablement, features of function and utility, combination therapies, and inventions involving artificial intelligence (AI) applications in these fields. Annexes III and IV aim to close these gaps by introducing structured principles and illustrative examples. Guidance on Patent Specification Requirements Annex III provides detailed guidance on the requirements for patent specifications in pharmaceuticals and biotechnology, covering two main parts: Part A addresses sufficiency of disclosure, clarity of specifications, and consistency between claims and descriptions. Part B covers inventions related to Markush-type compounds, claims containing exclusion statements (disclaimers), and additional experimental data submitted during examination. The Guidelines outline specific disclosure requirements for subject matters such as compounds, formulations, pharmaceutical compositions, genes, polypeptides, proteins, vectors, transgenic organisms, modified organisms, and hybrid cells. Annex III emphasizes that disclaimers are not accepted
Read More
December 17, 2025
Vietnam’s National Assembly approved wide-ranging amendments to the Intellectual Property (IP) Law on December 10, 2025, marking one of the most significant overhauls of the country’s IP regime in recent years. The changes, which supplement and refine existing provisions, are designed to align Vietnam’s framework more closely with international standards while addressing practical challenges faced by rights holders and practitioners. The amendments will come into force on April 1, 2026. The most notable changes are detailed below. Recognition of partial and nonphysical industrial designs: Industrial design protection has been broadened to cover partial designs and nonphysical forms (class 32), explicitly extending rights to parts of products that are not independently circulated as well as digital and intangible product appearances. The law clarifies that the external appearances of nonphysical products are protected industrial designs, and circulation of digital copies of any part of that appearance will be treated as an act of using the industrial design. The provision on the industrial applicability of industrial designs has also been amended accordingly to include the uniform reproduction of nonphysical products in cyberspace. Resolving conflicts between overlapping rights: The IP Law provides a safeguard against conflicts when a single subject matter is protected by multiple IP rights. Where overlapping rights exist, the later-arising right will be terminated if its exercise interferes with the normal exploitation of an earlier right. The decision to terminate such a later right rests with the court. Use of published data for AI training: Organizations and individuals may use lawfully published and publicly accessible documents and data for scientific research, testing, and AI system training. Such use must not unreasonably prejudice the rights or legitimate interests of authors or IP rights holders. Where the documents and data fall under copyright or related rights protection, their use must also comply
Read More
December 5, 2025
One morning, a California-based company mapping its Southeast Asia rollout opened an unexpected cease-and-desist letter from a Vietnamese IP firm. To the company’s surprise, the letter asserted that a local client already owned the company’s brand in Vietnam and threatened legal action. This is not an isolated incident. In another recent matter in the sports industry, a squatter demanded at least USD 48,000 from our client to “resolve” a similar conflict. For brands entering Vietnam or expanding distribution there, these tactics can create acute risk at precisely the point at which market momentum is building. Vietnam’s rapid economic growth and deepening integration into global trade have made it an increasingly attractive destination for multinational brands. Those same dynamics have intensified a longstanding issue: trademark squatting. Vietnam has modernized its IP framework over the past decade, but its strict first-to-file trademark system continues to incentivize opportunistic filings by parties with no legitimate interest in a mark. As more foreign brands build their reputation abroad before turning to Vietnam, squatters remain alert to timing gaps and enforcement frictions. The First-to-File System: Advantages and Vulnerabilities Vietnam adheres closely to the first-to-file principle under its Law on Intellectual Property. In practice, exclusive trademark rights belong to whoever submits the earliest valid application to the Vietnam Intellectual Property Office, regardless of prior use in Vietnam. This approach offers administrative clarity and reduces evidentiary burdens compared to use-based jurisdictions. Yet it also creates fertile conditions for squatting. Bad-faith actors regularly monitor foreign markets, identify brands gaining traction, and move quickly to register those marks domestically, often long before the genuine owner enters the market or prioritizes local filings. By the time the true brand seeks protection, the squatter’s application (or registration) stands as a legal obstacle, pushing businesses toward costly oppositions, cancellations, or uncomfortable negotiations
Read More