You are using an outdated browser and your browsing experience will not be optimal. Please update to the latest version of Microsoft Edge, Google Chrome or Mozilla Firefox. Install Microsoft Edge

December 21, 2020

Myanmar: Trademark Filing Changes and Challenges

Subscribe to Updates
Managing Intellectual Property

On August 28, 2020, the Ministry of Commerce (MOC) announced that the “soft-opening period” to refile trademarks under the country’s new Trademark Act would begin on October 1, 2020. This period, which is open to holders of trademarks recorded under Myanmar’s old system and to trademark owners who can prove prior use of their trademarks in the country, is expected to run for six months, though no closing date was stipulated in the MOC announcement. The date of the eventual “grand opening” of the Intellectual Property Department (IPD) will be the filing date for all applications submitted during the soft-opening period.

What are the changes?

  1. Filing procedure – Under the old system, brand owners (or their agents) had to manually file an original notarized declaration of ownership and legalized power of attorney with the Office of Registration of Deeds (ORD) under the Ministry of Agriculture, Livestock and Irrigation, which would then proceed with recordation. Under the new system, online filing is now in place, the original hard copies are not required, and the authority is the IPD of the Ministry of Commerce.
  2. Priority rights – With the implementation of the Trademark Law 2019, Myanmar is changing from its former first-to-use system to a first-to-file one. In addition to the IPD, all concerned authorities, such as the police and the courts, will need to adjust to the new paradigm for defining the rights of trademark owners.
  3. Examination procedure – Under the old system as defined under the Registration Act, there was no actual examination of the registrability of a mark; rather, registration could be refused if the officer felt that the mark was likely to be morally or legally objectionable, or likely to hurt the religious sensibilities of any Myanmar citizens. This is changed under the new system, and all trademarks registered under the old system and already used will be examined under the provisions of the Trademark Law 2019 before being published in the Trademark Gazette, upon which any interested person may file an opposition.

What are the challenges?

  1. Trademark volume – According to an unofficial announcement before the soft opening period, there are around 100,000 or more trademark declarations recorded under the old system. Moreover, the recordation of these trademarks was done manually, with the original declarations returned to the trademark owner after registration. There is no official search facility or database, and the ORD keeps its records confidential. Since many trademark owners want to claim protection under the Trademark Law 2019, the IPD must ensure that their online system and server can support the expected high volume of trademark filings.
  2. Examination process – In addition to considering how many trademarks will be refiled under the new Trademark Law, the IPD will need to determine the procedures for examining all newly refiled trademarks, as well as how long this process will take—particularly in light of the high volume.
  3. Using the online system – With the change to online filing, training and guidance for the users who will be essential to educate them not only on how to use the online system, but also about the law and the purpose of each requirement. Failing to provide this could result in serious delays for the registrar and IPD staff, and instability of the online system.

The soft-opening period to refile trademarks is the culmination of a long period of laying the groundwork for an updated IP protection regime in Myanmar. In the coming months and years, IP owners can expect to see progressive implementation of all four of Myanmar’s recently enacted IP laws, resulting in a truly modern system that spurs growth and competition in the country.

This article first appeared in Managing Intellectual Property.

Download Full Article
Related Professionals

Industries

Consumer Products

Practices

Intellectual Property

Location

RELATED INSIGHTS​ 

July 8, 2026
On July 7, 2026, the Trade Competition Commission of Thailand (TCCT) issued a press release announcing the establishment of two new subcommittees designed to intensify oversight of digital platforms and modern trade businesses. The formation of the digital platform subcommittee marks a significant escalation in competition enforcement following the TCCT’s Guidelines on Multi-Sided Platforms and E-Commerce Businesses, which took effect on March 25, 2026. Platform operators, sellers, and related service providers should expect heightened regulatory scrutiny and potential investigations into practices already flagged under the March guidelines. Two Dedicated Enforcement Bodies The first new body is the digital platform subcommittee—formally the Subcommittee on Supervision, Monitoring, and Prevention of Trade Conduct in Digital Platform Business. It is tasked with driving intensive oversight of digital platform businesses. It will coordinate with government agencies, the private sector, business operators, and other relevant stakeholders to supervise and prevent trade conduct that may affect competition, and to promote free and fair competition in the digital platform sector. The subcommittee will be composed of TCCT members and representatives from the Department of Internal Trade. The second body—the Subcommittee on Determining Guidelines and Action Plans Concerning Competition Conditions in Modern Wholesale and Retail Business—will study, analyze, and monitor market structure in modern wholesale and retail businesses, compile databases to analyze retail business concentration, assess impacts on small-scale operators, and propose supervisory measures for the retail sector. TCCT members will serve on the subcommittee alongside experts from government and private organizations, including the Office of Industrial Economics, the Office of Small and Medium Enterprises Promotion, the Thai SME Federation, and the Thai SME Council. Operational Impact for Industry Participants These subcommittees provide the TCCT with a focused mechanism to investigate various trade practices deemed unfair, and the TCCT has authority under the Trade Competition Act to issue cease-and-desist
Read More
June 29, 2026
Thailand’s cabinet has approved the draft Act on Liability for Defective Goods, commonly called Thailand’s “Lemon Law.” The Draft Act is currently pending consideration by Parliament. The draft law aims to strengthen buyers’ position in pursuing cases against sellers. While the Civil and Commercial Code offers provisions governing liability for defective goods, it is difficult in practice for buyers to successfully make a claim against sellers, particularly where defects are latent and not discoverable at the time of sale or delivery. By introducing product-specific rules and clearer remedies, the new law is intended to modernize Thailand’s consumer protection framework and align it more closely with international standards, and to help relieve the buyer’s burden of proof against the seller in product liability cases. If enacted, the draft act will take effect 180 days after publication in the Government Gazette, giving businesses a transition period to assess their compliance obligations. This article provides an overview of the key provisions of the draft act and highlights some practical considerations for businesses operating in Thailand. Scope and Key Definitions The draft act applies to sellers—defined as persons who sell goods in the ordinary course of business—and protects buyers, a term defined broadly to include not just the original purchaser but also transferees and successors in title. This expands the class of people who can bring claims. The law does not apply to used goods, live animals, or goods exempted by future ministerial regulation. It also leaves intact any separate warranties, promises, advertisements, or other guarantees a seller has given; those remain enforceable alongside the new statutory rights. General Liability for Defective Goods Sellers are liable for defects that exist at the time of delivery, regardless of whether the seller knew about them. Liability arises where a defect reduces: The benefit intended under
Read More
June 19, 2026
For the first time, Thailand’s Food and Drug Administration (FDA) has published a consolidated list identifying all substances that have successfully passed its novel food safety evaluation process. The list is a step forward in regulatory transparency, but it also highlights a feature of the Thai regime that food companies often overlook: each approval is tied exclusively to the company that applied for it. A substance’s appearance on the list does not give other companies the green light to use it. This article examines the structure of Thailand’s novel food approval framework, the implications of applicant exclusivity, and the strategic choices it requires of food companies looking to bring novel ingredients to the Thai market. Thai FDA Food Safety Evaluation Framework Notification No. 376 of the Ministry of Public Health requires novel food substances to undergo a food safety assessment, with an exemption only for novel foods manufactured exclusively for export. The framework also encompasses “foods that do not qualify as novel foods” but which present characteristics warranting a safety evaluation, such as differing quality standards, increased serving sizes, or applications in specific food categories, where such changes affect consumption levels, nutritional value, or consumer safety. The recently published list of foods that passed the safety evaluation by the Thai FDA is structured by substance category and identifies the approved company (domestic manufacturer or importer), country of origin, substance name and trade name, approved purpose of use, and date of the Thai FDA’s approval notification certificate. A notable feature of Thailand’s novel food regime is that the approval result is tied exclusively to the company that submitted the application. Publication of the consolidated list does not constitute a general authorization to use the approved substances. The Thai FDA’s approval certificate specifies the approved conditions of use and the requirements
Read More
June 17, 2026
Thailand’s new labeling requirements for medical devices, which include for the first time a unique device identification (UDI) requirement for software as a medical device (SaMD), take effect on June 20, 2026. The Notification of the Ministry of Public Health regarding Criteria, Methods, and Conditions on Labeling and Instructions for Use for Medical Devices 2025, which replaces a similar notification from 2020, was published in the Government Gazette on December 22, 2025. To ensure clarity, modernity, and patient safety, the regulation requires domestic manufacturers and importers to provide labels and instructions for use (IFU) that are clearly legible, complete, and free of false or misleading claims. It also permits IFU to be provided in electronic format, such as via QR codes, websites, or other digital channels—directly relevant to SaMD, where physical labels are impractical and electronic presentation is the natural medium. The notification distinguishes two categories for labeling language. Home-use medical devices (for lay users outside healthcare facilities) must have labels and IFU in Thai. Professional-use medical devices may display labels and documentation in either Thai or English. This distinction is significant for SaMD developers: software intended for clinical professionals may use English-language interfaces and IFU, while consumer-facing health applications must provide Thai-language content. Labeling and UDI Requirements Labels and IFU must include, at a minimum: Product name and intended purpose Quantity or volume Name and address of domestic manufacturer or importer Thai FDA approval number Lot, version, or serial number Manufacturing date and expiry date For SaMD, the version number requirement is particularly relevant. The regulation also mandates display of a UDI code for SaMD in risk category 2 (moderate-risk), category 3 (moderate- to high-risk), and category 4 (high-risk), according to Thailand’s medical device risk classification system (which complies with the ASEAN Medical Device Directive and the EU
Read More