You are using an outdated browser and your browsing experience will not be optimal. Please update to the latest version of Microsoft Edge, Google Chrome or Mozilla Firefox. Install Microsoft Edge

September 4, 2024

Indonesia Imposes Stringent Requirements on Electronic Cigarettes

Subscribe to Updates

Government Regulation No. 28 of 2024 (“GR No. 28”) was issued on July 26, 2024, to implement Law No. 17 of 2023 on Health (the “Omnibus Health Law”). GR No. 28 contains extensive provisions on tobacco products and electronic cigarettes in an effort to reduce the health risks associated with addictive substances, decrease the prevalence of smokers, and prevent the initiation of smoking among beginners in Indonesia.

The Indonesian FDA (known as “BPOM”) is working to implement the relevant provisions in GR No. 28 and has subsequently issued a draft regulation on the control and distribution of tobacco products and electronic cigarettes. This draft regulation is set to replace current BPOM Regulation No. 41 of 2013, which only covered tobacco products. The new draft regulation, however, also incorporates rules on electronic cigarettes.

This article outlines some of the measures on electronic cigarettes contained in GR No. 28 and the draft implementing regulation, focusing particularly on testing and reporting requirements, sale and pack size requirements, and labeling and advertising requirements.

Testing and Reporting

The draft regulation requires that each variant of electronic cigarettes produced or imported be tested for nicotine content. These tests must be conducted in an accredited laboratory, and the results must be reported to BPOM.

The use of additive materials is prohibited unless they have been proven safe for public health. To enforce this, electronic cigarettes must be tested for the presence of prohibited additives before they are distributed. Additionally, a verification of the content of prohibited additives must be conducted during the distribution period, with the testing and verification being carried out in different laboratories. The results of both tests (i.e., the pre-distribution test and the subsequent verification) must be reported to BPOM.

Sale and Pack Size

GR No. 28 prohibits the sale of electronic cigarettes:

  • Via self-service machines;
  • To individuals under the age of 21 (an increase over the previous minimum age of 18 years old) or to pregnant women;
  • In locations near entrance and exit doors or in high-traffic areas;
  • Within 200 meters of children’s educational facilities or playgrounds; and
  • Through web services, commercial electronic applications, or social media platforms without age verification.

GR No. 28 also establishes pack size requirements for electronic cigarettes. For closed-system or single-use cartridge electronic cigarettes, the liquid nicotine content must not exceed 2 mL per cartridge, and each package cannot contain more than two cartridges. For open-system or refillable electronic cigarettes, liquid nicotine must be sold in 10-milliliter or 20-milliliter containers. For solid electronic cigarettes, there must be 20 sticks per pack.

Labeling

Electronic cigarette labels are required to display health warnings in both text and image format, providing educational information about the risks of smoking. These health warnings must be printed on the package surface as an integral part of the packaging. There are five different required warnings for each variant of electronic cigarette. Each of the five warnings must be equally displayed on all of the electronic cigarette packs for each variant.

The health warning text and images must be displayed on all sizes of electronic cigarette packages. Each package must show one type of health warning, which cannot be obscured by anything else. The warning must meet the following criteria:

  • The warning must be displayed on the top portion of the package (horizontal orientation), on both the front and back, covering 50% of the surface area;
  • The packaging must include the word “warning” in yellow text that stands out clearly on a black background;
  • The image must be printed in color; and
  • The font must be Arial Bold, proportional to the package size, with yellow text on a black background.

The draft regulation also requires electronic cigarette labels to include the following information:

  • A statement that the product contains nicotine;
  • A statement that the product is prohibited from being sold or provided to individuals under the age of 21 or to pregnant women; and
  • The production code; date, month, and year of production; and the name and address of the manufacturer.

The label must not contain any misleading information or sign or any promotional wording.

Advertising

GR No. 28 stipulates extensive advertising requirements for electronic cigarettes. Advertising on digital-based social media platforms is prohibited. GR No. 28 also specifies requirements for advertisements placed on websites and commercial electronic applications. requirements for advertisements at point-of-sale locations and via outdoor media, print media, and broadcasting media.

Advertisements on websites or commercial electronic applications:

  • Must include a health warning and a statement prohibiting the sale or provision of electronic cigarettes to individuals under the age of 21 and to pregnant women;
  • Must not illustrate or suggest that using electronic cigarettes offers health benefits;
  • Must not use misleading words or phrases or encourage the consumption of electronic cigarettes,
  • Must not depict the use or display of electronic cigarettes or any references that could be associated with the brand;
  • Must not feature children, teenagers, or pregnant women in any pictures or text;
  • Must not target children, teenagers, or pregnant women;
  • Must not use cartoons or animation as advertising characters;
  • Must not contradict public norms;
  • Must implement age verification to limit access to those 21 years old and above.

Conclusion

Businesses operating in the electronic cigarette industry in Indonesia need to stay vigilant and proactive in response to these new regulatory requirements. Compliance will not only require adjustments in production, packaging, and marketing strategies but also proactive due diligence to avoid potential legal repercussions. Companies should consider conducting comprehensive audits of their current practices and seek legal counsel to ensure full compliance with the evolving regulatory landscape. By doing so, they can better navigate the complexities of these stringent regulations and mitigate risks that could impact their market presence and operational continuity.

Related Professionals

Practices

Regulatory Affairs

Location

RELATED INSIGHTS​ 

September 9, 2026
On August 5, 2026, the Consumer Case Division of Thailand’s Civil Court rendered a judgment in a case involving a beauty clinic that advertised acne scar treatments using claims that the clinic was operated by a specialist physician and that the treatment, allegedly involving stem cell technology, could permanently remove acne scars. The plaintiff brought a claim against both the physician-owner and the clinic company, alleging that the advertisements were false and induced her to purchase the treatment. The court found that the clinic was liable for the false representations and that the physician-owner, as both the authorized director of the company and the medical practitioner who provided treatment, was jointly responsible. Although the plaintiff could not fully prove all damages claimed, the court awarded compensation of THB 20,000, together with interest. While the judgment arose from a consumer protection dispute, it serves as a valuable reminder that medical facility advertisements in Thailand are regulated and may expose clinics and healthcare providers not only to regulatory enforcement but also to civil liability from patients who rely on misleading promotional claims. Regulatory Framework Governing Medical Facility Advertisements Medical facility advertising in Thailand is governed by the Medical Facility Act B.E. 2541 (1998), as amended by the Medical Facility Act (No. 4) B.E. 2559 (2016). The principal secondary legislation is the Department of Health Service Support (DoHSS) Notification Re: Rules, Procedures, Conditions, and Fees for an Advertisement or Publication Concerning a Medical Facility, which came into force on November 25, 2019. Under this notification, “advertising” includes any act, by any means, that causes members of the public to see, hear, or otherwise become aware of a message, sound, or image for the commercial benefit of a medical facility. This broad definition covers not only traditional media but also clinic websites, social
Read More
September 9, 2026
On June 30, 2026, Indonesia’s National Agency of Drug and Food Control (BPOM) issued BPOM Regulation No. 11 of 2026 on Food Packaging, which expands the list of approved food-contact substances and recognizes a broader range of permissible functions for those substances. The new regulation, which revokes BPOM Regulation No. 20 of 2019, reflects developments in packaging technology and materials science. Although the new regulation provides more advantages to business actors by adding more food contact substances to the approved list for use in food packaging, there are more stringent rules and restrictions for testing. One of the most significant changes is a comprehensive migration-testing framework that sets out requirements for packaging materials, testing conditions, food simulants, and specific migration limits. Overall and Specific Migration Under BPOM Regulation No. 20 of 2019, migration requirements were primarily set out within the lists of approved food-contact substances and packaging materials. BPOM Regulation No. 11 of 2026 instead expressly requires packaging materials that come into direct contact with food to meet both overall and specific migration limits. These are defined as follows: Overall migration: The total quantity of all substances that migrate from the packaging, regardless of whether the substances are hazardous or nonhazardous to health. Specific migration: The quantity of a particular identified substance known to be hazardous to health that migrates from the packaging. Stricter Limits on Heavy Metals The overall migration limit for plastic packaging remains unchanged under both regulations at 60 mg/kg or 10 mg/dm². However, the new regulation introduces significant changes to the regulation of heavy metals. Under the 2019 regulation, four heavy metals—lead, cadmium, chromium VI, and mercury—were subject to a single combined limit of 1 mg/kg. The 2026 regulation, however, requires each heavy metal to meet its own individual specific migration limit, adds arsenic as
Read More
September 4, 2026
Blind boxes and collectibles have become increasingly popular, driven by the excitement of not knowing which character or design will be revealed until the package is opened. While most visible in the art toy market, the same concept is also used in the food industry. Confectionery, snacks, and other food products are sometimes sold with toys, character figures, cards, or other collectibles. A package might, for example, contain one of ten possible characters, with consumers knowing that an item is included but not which one they will receive. Some collections may also feature rare or “secret” items. For food businesses, however, adding a randomized toy or collectible involves more than a marketing decision. The food, the nonfood item, and the randomized mechanism may each raise different regulatory considerations in Thailand. Thai FDA Requirements for Nonfood Objects Packaged with Food The main food regulatory consideration is Ministry of Public Health Notification No. 310 B.E. 2551 (2008), which regulates food packaged together with things or objects that are not food. Under Notification No. 310, certain nonfood objects may be packaged together with food where they fall within specified exceptions, including objects that serve the following purposes: Maintaining the quality or standard of the food, such as a desiccant or oxygen absorber; Serving as a seasoning or as part of food preparation, such as chili powder sachets or seasoning sachets contained in instant noodle packages; or Functioning as an eating or food-preparation utensil, such as a spoon or fork included with instant noodles. Other nonfood objects that do not fall within these categories generally should not be placed inside the food container together with the food. Where a toy, collectible, or other nonfood object is intended to be sold together with a food product, businesses should therefore carefully consider the nature of
Read More
August 20, 2026
As part of its membership in Lex Mundi, Tilleke & Gibbins has released the latest edition of its Guide to Doing Business in Thailand, providing an overview of the legal, regulatory, and commercial considerations for companies establishing or expanding operations in Thailand. The 2026 edition offers practical insight into the country’s business environment, investment framework, and operational requirements. The guide covers a wide range of topics relevant to foreign and domestic investors, including: Investment incentives and promotion schemes Financial facilities and banking regulations Exchange controls and money transfers Import and export regulations Business structures and incorporation options Requirements for establishing a business Operational and compliance considerations Business cessation and insolvency procedures Employment and labor laws Taxation Immigration and visa requirements Prepared by Tilleke & Gibbins lawyers across multiple practice areas, the publication outlines key aspects of doing business in Thailand, including foreign investment restrictions, regulatory compliance obligations, corporate structures, employment requirements, and recent legal and economic developments affecting investors. The publication forms part of Lex Mundi’s Country Guides series, a global collection of jurisdiction-specific reference materials prepared by member firms around the world. Together, these guides help companies evaluate opportunities, compare regulatory environments, and plan international business activities across multiple markets. The full Guide to Doing Business in Thailand 2026 is available through the button below.
Read More