You are using an outdated browser and your browsing experience will not be optimal. Please update to the latest version of Microsoft Edge, Google Chrome or Mozilla Firefox. Install Microsoft Edge

August 10, 2026

Changes in Nutrition Labeling Requirements in Indonesia

Subscribe to Updates

On June 17, 2026, Indonesia’s National Agency of Drug and Food Control (BPOM) issued BPOM Regulation No. 10 of 2026 on Nutritional Information on Processed Food Labels.

The new regulation, which revokes three previous nutrition labeling regulations, introduces several notable changes affecting food and beverage manufacturers, importers, and distributors. These changes range from updated nutrient reference values and serving-size requirements to the introduction of the Nutri-Level front-of-pack labeling system for certain beverage products. Businesses operating in Indonesia should carefully review these developments and assess their products’ compliance with the new requirements during the transition period.

Implementation of the Nutri-Level Labeling System

To implement the recently issued decree on Nutri-Level labeling, BPOM Regulation No. 10 of 2026 stipulates the requirements to implement the Nutri-Level labeling system on the front-of-pack. Under the new framework, ready-to-drink beverages, powdered beverages, and liquid or solid concentrates are required to display Nutri-Level labeling on the front label of their packaging.

The Nutri-Level labeling system classifies products into color-coded levels A through D based on their sugar, sodium, and total fat content. The applicable Nutri-Level is determined based on the lowest level measured in the assessment of sugar, sodium, and total fat content.

For products classified as level C or D, the Nutri-Level label must be accompanied by information on the relevant sugar, sodium, and total fat content per 100 ml of the ready-to-consume product. Products classified as level A or B may either display only the Nutri-Level designation or display the Nutri-Level together with the relevant nutritional information per 100 ml.

Minimum Vitamin and Mineral Content Required for Declaration

BPOM Regulation No. 10 of 2026 introduces a stricter threshold for the declaration of vitamins and minerals in the nutritional value information section (ING).

Vitamins or minerals may only be declared if they are present at a level of at least 5% of the recommended dietary allowance (RDA) per serving, per 100 g, per 100 ml, or per package, in accordance with the inclusion of the ING table, except for processed foods that declare vitamins or minerals claims in accordance with certain laws and regulations. This represents a significant change from the previous regime under the now-revoked BPOM Regulation No. 26 of 2021, under which vitamins and minerals could be declared when present at a level of at least 2% of the RDA per serving.

Revised Serving Size Requirements

While serving size declarations were already required under BPOM Regulation No. 26 of 2021, BPOM Regulation No. 10 of 2026 introduces additional technical guidance on serving-size determination and presentation. The new regulation expressly requires serving sizes to be rounded to the nearest half-unit, providing a standardized approach to serving-size calculations across product categories. An exception applies to products classified under food category 11.6 (sweeteners, including table-top sweeteners and high-intensity sweeteners), which may require businesses to review and, where necessary, update their existing nutrition labeling.

In addition, an appendix to Regulation No. 10 of 2026 sets out updated serving-size references for a wide range of food categories. As a result, food business operators should review the revised category-specific serving-size references to determine whether their existing nutrition information tables, nutrient calculations, and serving-size declarations remain compliant under the new framework. Although serving-size requirements were already regulated under BPOM Regulation No. 26 of 2021, the 2026 regulation provides greater technical detail and updated references that may necessitate label revisions for certain products.

Updated Nutrient Reference Values

BPOM Regulation No. 10 of 2026 updates the nutrient reference values previously set forth in BPOM Regulation No. 9 of 2016 to correspond with the current development of scientific knowledge in health. Several reference values have been revised from those in BPOM Regulation No. 9 of 2016 (e.g., for total fat, vitamin B1, vitamin B2, vitamin B12, magnesium, potassium, and various other vitamins and minerals). As these values are used to calculate the percentage of RDA displayed in nutrition information tables, the revisions may affect the nutrient percentage calculations currently appearing on product labels.

The regulation also introduces updated nutrient reference methodologies and conversion factors. In particular, vitamin B3 may now be expressed in niacin equivalents (NE), folate may be expressed in dietary folate equivalents (DFE), and revised conversion factors have been adopted for vitamins A, D, and E. These changes are intended to align nutrition labeling requirements with current nutritional science and may require food business operators to reassess existing nutrient declarations and label calculations.

Updated Nutritional Value Information Table Formats

BPOM Regulation No. 10 of 2026 updates the standardized formats for the nutritional value information (ING) table. The regulation continues to allow both vertical and horizontal formats and now provides clearer templates for use on product labels.

For horizontal presentation, businesses may use either a three-column tabular format, which provides more space for displaying nutrient information and additional vitamins or minerals, or a two-column tabular format, which offers a simplified layout suitable for products with limited label space.

 

Three-column per-serving tabular format

 

Two-column per-serving tabular format

 

Three-column per-package tabular format

 

Two-column per-package tabular format

 

BPOM Regulation No. 10 of 2026 also introduces specific flexibility for micro-enterprises regarding the ING table. If analytical results are unavailable and the value of a processed food nutrient has not yet been established by the head of BPOM, the values in the ING table should be declared based on calculation results. The procedure for calculating the nutrient content for processed foods produced by micro-enterprises was established by the head of BPOM in 2026 and involves mostly traditional Indonesian food products.

Transition Period

BPOM Regulation No. 10 of 2026 provides a 24-month transition period to facilitate compliance with the new requirements, so processed foods that had already obtained distribution permits before the regulation entered into force, as well as products that were undergoing registration at that time, must be brought into compliance with the new regulation by June 17, 2028. Similar transitional provisions apply to the implementation of Nutri-Level labeling requirements for affected beverage products. As a result, food business operators are afforded additional time to review product portfolios, update nutritional information, and revise product labels where necessary.

Business Impact

The new regulation will require many food and beverage businesses to review their existing nutrition labeling practices in order to comply with the new requirements. In particular, companies should assess the impact of the revised nutrient reference values, updated serving-size requirements, and Nutri-Level labeling requirements on their products.

The Nutri-Level requirements will be especially relevant for beverage manufacturers. Businesses should therefore begin evaluating their product portfolios and preparing any necessary label updates to ensure compliance before the expiry of the 24-month transition period.

Related Professionals

Industries

Life Sciences

Practices

Regulatory Affairs

Location

RELATED INSIGHTS​ 

November 14, 2022
Following the delisting of cannabis grown in Thailand as a narcotic substance on June 9, 2022, many have explored the applications of cannabis in various fields, including medicine, healthcare, food products, cosmetics, and animal feed. For example, a poultry farm in northern Thailand conducted an experiment jointly with Chiang Mai University, mixing crushed cannabis into poultry feed and water. The experiment showed several benefits of this cannabis feed. Birds that were fed cannabis had lower mortality rates and achieved superior body mass, with increased levels of protein, fat, and moisture in the meat, leading to this method of organic bird farming yielding higher profits. Despite the results of this experiment, the mechanisms and action of cannabis in animal feed are still not yet fully understood, and there are concerns about the possible effects on human health of consuming cannabis-fed poultry. Until recently, cannabis regulations focused solely on the safety of use by humans, and there were no regulations on the use of cannabis in animals. However, on October 11, 2022, the Department of Livestock Development (DLD) published Notification Re: Guidelines on the Use of Hemp and Marijuana as Especially Controlled Animal Feed or Their Use as Ingredients in Especially Controlled Animal Feed in the Government Gazette. In general, the DLD notification requires that animal feed containing cannabis be shown to benefit the animals without causing concern for their safety. According to the Animal Feed Quality Control Act B.E. 2558 (2015), especially controlled animal feed must be registered before it can be manufactured domestically or imported into Thailand. The DLD notification lays down the following evaluation criteria for registration of animal feed containing cannabis: It is prohibited to use cannabis (both hemp and marijuana) apexes (i.e., leaf tips), inflorescence, or seeds—including extracts from apexes, inflorescence, or seeds—as especially controlled animal
Read More
October 14, 2022
Interest in organic farming, soil health, and regenerative agriculture has increased rapidly in recent years, and the demand for biological and organic fertilizers has accordingly undergone dramatic growth. Biological fertilizers contain specific levels of microorganisms (such as nitrogen-fixing bacteria); organic fertilizers similarly contain microorganisms and typically come from animals and plants, such as livestock manure and crop residues. Although responsible fertilizer use is still necessary to prevent unintended effects, these “living fertilizers” can boost yields and promote plant productivity without many of the adverse environmental effects and safety concerns of chemical fertilizers. This makes them highly sought after for organic farming, and prized by agricultural operators looking to promote soil health as a bedrock of sustainable agricultural practices. As the global trade for organic and biological fertilizers has scaled up, producers and agribusiness companies have expanded organic and biological fertilizer offerings to new markets. Not only do different countries have their own regulations for fertilizers in general, but they also often have specific requirements and rules for biological and organic fertilizers. This guide provides fertilizer producers and traders with an overview of the legal landscape for these fertilizers in three major Southeast Asian markets so that businesses can make their fertilizers available and foster sustainable agricultural practices in the region. The full Biological and Organic Fertilizers in Indonesia, Thailand, and Vietnam guide can be downloaded through the button below.
Read More
August 25, 2022
On July 27, 2022, Myanmar’s Ministry of Commerce (MOC) issued Newsletter No. 8/2022 to effectively ban foreign companies and foreign joint ventures from exporting value-added beans, corn, and sesame. This newsletter repealed Newsletter No. 2/2020, which had prescribed the criteria for beans, corn, and sesame to be considered “value-added” crops. These criteria had to be fulfilled in order for these commodities to be exported in accordance with Notification No. 24/2019, which had permitted foreign companies and foreign joint ventures to purchase seven categories of commodities from local manufacturers for export, subject to certain terms and conditions. These include: Meat and fish; Value-added crops; Pulp and paper; Seeds; Refined metals; Semi-finished or finished valued-added fruit products; and Timber-based furniture. With the repeal of the conditions in Newsletter No. 2/2020, foreign exporters are left with no reference criteria for how to achieve “value-added” status for beans, corn, and sesame, and thus will not be able to submit a complete application for the necessary export license. However, exportation of the other items in the list above remains unaffected and open to foreign exporters who meet the applicable requirements. The MOC explained their decision to revoke the permitted criteria by noting that some foreign companies were not actually producing beans, corn, and sesame that fulfilled the criteria for value-added status as laid out in Newsletter No. 2/2020, but were falsely exporting their goods as “value-added crops.” The revocation of the export criteria for beans, corn, and sesame took immediate effect. For more details on these export restrictions, or on any aspect of importation and exportation regulations in Myanmar, please contact Tilleke & Gibbins at [email protected].
Read More
August 23, 2022
On July 13, 2022, the Vietnamese government issued Decree No. 46/2022/ND-CP amending and supplementing some articles of Decree No. 13/2020/ND-CP providing detailed guidance on the Law on Animal Husbandry (“Decree 46”). The new decree took effect on the issuance date. Among the changes introduced by Decree 46 are a number related to animal feed. Recognition of Testing Methods of Exporting Countries Decree 46 clarifies the steps to recognize animal feed testing methods of laboratories in exporting countries. Under the amended regulations, the Department of Livestock Production (DLP) will organize an assessment team to appraise each dossier for recognition of animal feed testing methods within 30 days of receipt of a complete dossier. If the dossier lacks required information or authenticity, the DLP will organize a practical assessment team at the exporting country’s testing laboratory. If the dossier passes the assessment, within five working days from the completion of the assessment, the DLP will issue a decision on recognition of the testing method. The validity of this decision has been lengthened from three years to five years. State Inspection of Animal Feed Quality Process of State Inspection Decree 46 specifies the process to conduct state inspection of the quality of imported animal feed by unifying the regulations stipulated in the related legal documents listed in Decree 13. The process includes the submission of a state inspection dossier, timelines to receive feedback from the inspection authority, and further steps that can be taken upon receiving acceptance or refusal decisions from the authority. For traditional animal feed and complete compound animal feed, imported shipments are customs-cleared as soon as the importer completes the customs procedures. Within 15 days from the customs clearance date, the importer must submit the conformity assessment results. The importer has complete responsibility for the conformity assessment results, and
Read More