You are using an outdated browser and your browsing experience will not be optimal. Please update to the latest version of Microsoft Edge, Google Chrome or Mozilla Firefox. Install Microsoft Edge

December 6, 2018

Case Studies on Board of Patents’ Decisions Relating to Product Design Novelty

Subscribe to Updates
Informed Counsel

To be eligible for a design patent under Thai law, a product design must be novel and industrially applicable. A product design is considered to be novel if, before the application is filed, the design:

  • is not widely known or used in Thailand;
  • is not disclosed or described in Thailand or another country;
  • is not published; and
  • does not sufficiently resemble any previous designs to be considered an imitation.

These criteria, stipulated by law, are deliberately straightforward so that unpatentable product designs can be easily weeded out. However, when a design patent application is filed for a design that is similar in appearance to a publicly available product, it can be challenging to assess whether the new application will be granted. This article takes an in-depth look at two cases that fall under this scenario, the reasoning that the Board of Patents (BOP) adopted in addressing them, and the ultimate decisions that it reached.

Case Studies

On June 27, 2018, the BOP ruled that a design for roofing plates was novel, compared to four prior art designs for existing patents.

The BOP compared the new design to the four existing designs in order to determine whether the new design was recognizably different. In deliberating the case, the BOP found that the new design featured a roof tile with a wave pattern in which the upper and lower waves were the same size and appearance. Additionally, the two-stripe patterns, oriented in a perpendicular direction to the waves and located at both ends of the roof tile, were held to be a unique feature. These combined characteristics passed the novelty test and led the BOP to render the design as novel compared to the existing patents.

Approximately one month after the decision in the roofing plates case was rendered, the BOP dismissed a design patent application for a screw cap for a jar on the grounds that it was substantially similar to a prior art design for an existing patent. 

 
       
According to the BOP, the new product design comprised a round cap with a flat top and bottom and convex vertical strips along the outer edge. In addition, a vertical cross-section of the cap featured a flat surface with a groove. Ultimately, these elements were found to be substantially similar to the prior art design. Although the grooves of the new design were wider and deeper than those of the prior art, these differences were insufficient for the design to be considered novel.

Conclusion   

In the deliberation of both cases, the BOP considered each element of the new product design, and the overall appearance, and compared them to prior designs. If they found that the combined elements created an overall appearance that was sufficiently different from the previous design, then the new product design was deemed to be novel.   

The BOP’s decisions on these two cases make it clear that, when comparing prior art designs to the design in a new application, the focus goes beyond merely identifying unique parts. The BOP also pays considerable attention to the cohesiveness of the overall appearance of the product. As shown in the second case, a design will not be considered as novel if it is substantially similar to existing designs in overall appearance. However, individual elements can help to distinguish the overall appearance of a design from other existing designs, and thus make it patentable.    

One practical upshot of this is that it is prudent to point out all unique and unifying elements of a design when filing a response to an office action or appeal to the BOP regarding the novelty of a product design. This strategy can be very useful in successfully registering a challenged application.

Download Full Article
Related Professionals

Practices

Intellectual Property

Location

RELATED INSIGHTS​ 

July 13, 2026
When Decree No. 186/2026/ND-CP (Decree 186) takes effect on July 15, 2026, it will introduce the most significant reform of Vietnam’s administrative IP enforcement framework since Decree 99/2013/ND-CP was issued in 2013. These changes are expected to make administrative enforcement faster, more accessible, and better suited to the realities of modern IP disputes. Below are the principal reforms and their practical implications for rights holders and enforcement practitioners. The End of Notarization and Consular Legalization Among the most welcome procedural changes is the abolition of the notarization and consular legalization requirement for powers of attorney (POA) submitted in administrative enforcement proceedings. Under the previous regime, foreign rights holders were generally required to execute a POA, then have it notarized and consular legalized (if seeking customs recordal). In practice, this process frequently delayed enforcement by four to eight weeks, often long enough for infringing goods to disappear before authorities could intervene. Decree 186 removes this bottleneck, now requiring only an original or certified copy of the POA. If the document is in a foreign language, a Vietnamese translation is sufficient, provided it is certified by a competent authority or confirmed by the authorized Vietnamese IP representative. Consular legalization and notarization are no longer required. For rights holders, the practical impact is substantial. Administrative enforcement files that previously took weeks to prepare can now be completed in a matter of days, allowing much faster responses in time-sensitive matters such as warehouse raids, border interventions, and trade-fair enforcement. The decree also introduces a useful administrative simplification. Where an original POA has already been submitted to the same enforcement authority and remains valid, applicants may rely on a copy of that earlier submission by identifying the previous case file. This eliminates unnecessary duplication for rights holders pursuing multiple enforcement actions before the same
Read More
July 9, 2026
Recycling, upcycling, and refill-packaging models are now widely promoted as ways to reduce waste, lower carbon emissions, and respond to consumer demand for sustainable products. However, complications arise when these environmentally driven trends intersect with intellectual property law—particularly where reused or altered packaging continues to display third parties’ registered trademarks. Adding to this complexity, Thailand’s draft Sustainable Packaging Management Act aims to introduce new environmental compliance obligations that businesses must navigate alongside existing trademark concerns. Recycling and upcycling packaging may infringe trademark rights, especially in cases not protected by the first-sale doctrine—the principle that a trademark owner’s rights over a particular mark-bearing product end once the owner first sells it. Furthermore, even refill packaging carries legal risk due to specific statutory prohibitions under Thai law. Compounding these challenges, the draft Sustainable Packaging Management Act will impose extended producer responsibility (EPR) obligations on manufacturers and brand owners, requiring them to manage packaging throughout its lifecycle. These overlapping legal frameworks could deter manufacturers from pursuing ESG-aligned business models unless businesses understand how to navigate both trademark and environmental requirements. Under Thai law, this issue remains uncertain because the Trademark Act does not expressly codify the first sale doctrine, also known as the exhaustion of trademark rights. Generally, this doctrine provides that once a trademark owner has lawfully sold goods bearing its trademark, the owner’s right to control further resale of those particular goods is exhausted. The rationale is that the owner has already received commercial benefit from the first authorized sale; therefore, the purchaser should be free to resell or otherwise dispose of the goods. Although the doctrine is not expressly codified in the Trademark Act, Thai courts have recognized it in relation to genuine goods and parallel imports, as seen in a Supreme Court Judgment No. 2817/2543 in which the
Read More
July 6, 2026
Indonesia’s regulation on reporting online intellectual property (IP) infringement provides comprehensive procedural guidance for IP rights holders and their licensees in reporting online infringement complaints. Issued in December 2025 by the Ministry of Law as Regulation No. 47 of 2025 regarding Handling of Intellectual Property Infringement Reports in Electronic Systems, this regulation covers all types of IP rights. It also specifies documentation when reporting infringement, and lays out the procedures for examination, verification, and enforcement actions. Submission of Complaints Complainants may submit reports through the online system of the Directorate General of Intellectual Property (DGIP) or in person at the DGIP office. Complaints may also be filed through an authorized proxy. Under the regulation, complainants are required to provide the following information and documents: Personal details of the complainant; Brief description of the protected work or subject matter (i.e., type of IP and name or address of the infringing website, portal, account, or application, or a link to the location of the infringing content); Complete description of the alleged infringement; Certificate of registration or recordal of the relevant IP; Recordal of IP license agreement, if any; and Other supporting evidence. Verification and Examination Process Upon receiving a complaint, the responsible formality officer may request clarification or additional supporting documents. In the latter case, the complainant must then submit the necessary administrative documents within 14 days of the notification date. Once the documentation is deemed complete and sufficient, the case will be formally registered. Subsequently, the DGIP will establish a verification team to handle online IP violations, which will include the Civil Servant Investigator (PPNS), the Ministry of Communication and Digital Affairs, experts with relevant expertise in IP, and representatives from related associations such as AVISI (Indonesian Video Streaming Association). After examining the report, the team will prepare the Minutes
Read More
June 30, 2026
Customs recordation is an enforcement mechanism in Myanmar that enables intellectual property (IP) rights holders to seek prevention of the cross-border movement of infringing goods. The enactment of Myanmar’s IP laws in 2019 has enabled customs recordation for registered marks and copyrights under the Trademark Law 2019 and the Copyright Law 2019. By contrast, the Patent Law 2019 and the Industrial Design Law 2019 do not provide a practical framework for customs recordation, and accordingly such rights are not subject to the customs recordation regime. Under the Trademark Law 2019, rights holders may apply for customs recordation and may also ask the Customs Department to suspend the release of goods suspected of bearing counterfeit marks. Likewise, the Copyright Law 2019 allows for customs intervention in relation to pirated works. These provisions reflect Myanmar’s gradual alignment with international standards on border measures, although the implementation framework remains at a relatively early stage of development. Customs Recordation Pursuant to the Trademark Law 2019 and the Copyright Law 2019, the relevant authorities have issued customs rules concerning the protection of registered marks and copyrights. In practice, the process generally begins with the submission of an application to the Customs Department together with supporting documentation. This typically includes proof of registration in Myanmar; details of the rights holder, applicant, and any authorized representative; and a comprehensive description of the genuine goods. Product identification materials—such as photographs, packaging samples, and distinguishing features—are particularly important in helping customs officers identify suspected infringing goods. A recordation remains valid for two years from the date of approval. It may be renewed for additional two-year terms, provided that the renewal application is filed within the thirty days prior to expiry for marks and up to thirty days in advance of the expiry date for copyrights, in accordance with
Read More