Effective June 22, 2026, Thai Industrial Standards (TIS) for food contact paper and cooking paper will be enforced as mandatory for sale in the Thai market. This move has important implications for product licensing and tightens hygiene, labeling, and chemical-safety requirements for food-contact and cooking paper products. Thailand is strengthening its regulatory framework for paper-based culinary materials against a backdrop of accelerating global commitments to ESG and sustainability, as such materials—particularly those derived from natural or recycled fibers—have emerged as key alternatives to plastics in food preparation, cooking, and packaging applications. As a result, regulators worldwide are tightening controls to ensure that sustainability initiatives do not compromise consumer safety, particularly regarding the potential migration of chemical substances into food. Regulatory Framework: Voluntary vs. Mandatory Standards Standards under the TIS regime are generally classified into two categories. Voluntary standards allow manufacturers or importers to apply for a product license and affix the TIS mark to demonstrate product quality and build consumer confidence, but compliance is not legally required. Mandatory standards, by contrast, require manufacturers and importers to obtain a product license and affix the TIS mark before placing products on the Thai market, and noncompliant products cannot be legally sold. Previously, the TIS standards for food contact paper (TIS 2948-2562) and cooking paper (TIS 3438-2022) fell under the voluntary standard regime, meaning that obtaining a TIS license and displaying the TIS mark was optional. However, due to the increasing use of paper in food preparation and cooking, the Thai Industrial Standards Institute has determined that upgrading these standards to mandatory status is necessary to enhance consumer safety. As a result, all paper intended for food contact or cooking purposes must now obtain a TIS product license prior to sale in Thailand. Scope of the Standards The primary distinction between the two standards lies in their respective

Thailand’s Anti-Corruption Cooperation Committee has issued a major update to the anticorruption standards required for private entities engaging in high-value state projects. The update, titled “Announcement re: Procurement Limits and Minimum Anticorruption Standards (No. 2),” replaces and amends key provisions of the original announcement dated September 25, 2024. Published in the Government Gazette on April 10, 2026, the new rules take effect on May 10, 2026, and apply to projects valued at more than THB 300 million (approximately USD 9.3 million). The key amendments to the anticorruption standards are detailed below. Expanded Definition of Conflict of Interest The 2026 regulation significantly broadens the scope of what constitutes a conflict of interest compared to the 2024 version, which focused primarily on basic kinship and business ties. Under the new rules, a conflict of interest includes using one’s position or authority to seek benefits for oneself, a group, close associates, or business, including through business relationships, kinship ties, or relationships with spouses or individuals living together as partners without marriage registration. The 2026 announcement also introduces specific examples that were largely absent from the 2024 text, such as holding shares in similar businesses that submit proposals for the same project, or submitting proposals for projects in which a relative, spouse, or unregistered partner is an “involved party” in that procurement. Continuous Compliance: The “Final Payment” Rule Under the 2024 rules, the coverage period for anticorruption policies was less strictly defined. The new regulation mandates a continuous timeline: policies or certifications must remain effective from the date of bid submission until the contractor receives the final payment installment under the contract. If a certification or policy is set to expire before the final payment, the contractor must submit a new self-audit form and supporting evidence to the state agency before the original document expires. Mandatory Qualification Requirements in the

Vietnam has progressively positioned blockchain as a strategic technology within its broader digital transformation agenda over the past decade. From early policy orientations to more recent legislative developments, the regulatory approach has gradually shifted from high-level recognition to more concrete legal integration. Against this backdrop, a new draft decree regulating activities relating to product and goods identification, authentication, and traceability (the “Draft Decree”) marks a notable turning point. Rather than merely referencing blockchain as a policy priority, the Draft Decree incorporates blockchain directly into a nationwide regulatory system, positioning it as part of the underlying infrastructure for data governance and public administration in relation to the management, verification, and traceability of product-related data. Evolution of Vietnam’s Blockchain Legal Framework: The Draft Decree in Context Vietnam’s blockchain legal framework has developed in several distinct phases. The first phase, beginning around 2019, was characterized by high-level policy recognition in several resolutions of the Party Central Committee. Particularly, blockchain was identified as part of the broader category of digital technologies critical to industrial modernization and participation in the Fourth Industrial Revolution. These resolutions did not regulate blockchain directly, but established its strategic importance at the national level. The second phase (2023 to 2025) saw the introduction of national strategies and technology policies that more explicitly recognized blockchain as a priority technology. Those policies collectively signaled a clear policy commitment to developing blockchain infrastructure and applications. However, these instruments remained largely at a policy-level and did not establish binding regulatory frameworks. The third phase (from 2025) involves the gradual integration of blockchain into sectoral legislation. Laws such as the Law on Digital Technology Industry (2025), the Law on Personal Data Protection (2025), and the Law on Science, Technology, and Innovation (2025) have introduced concepts such as digital assets, crypto assets, and even specific provisions relating to blockchain

Thailand’s Board of Investment (BOI) has introduced a new investment promotion measure to encourage partnerships between Thai and foreign automotive parts manufacturers. The measure, published in the Government Gazette on March 31, 2026, under Notification of the Board of Investment No. 5/2569 Re: Investment Promotion Measures for Joint Ventures between Thai and Foreign Companies in the Auto Parts Manufacturing Industry, aims to enhance local industry participation and create new business opportunities for Thai operators. Corporate Income Tax Exemption Under this measure, the BOI grants an additional corporate income tax (CIT) exemption of three years to both new investment projects and existing operators under the BOI’s business category 3.4 (manufacture of engines, equipment, or parts) or category 3.5 (manufacture of vehicle parts). If the CIT exemption period is added to an existing one, the total exemption period will be capped at a maximum of eight years. To benefit from the exemption, certain conditions must be met, as described below. Conditions for New Investment Projects The joint venture company must be newly established after January 15, 2026. At least 20% of the registered capital must be held by a Thai juristic person throughout the CIT exemption period. The Thai juristic person must have been operating in the automotive or auto parts industry for at least three years prior to the application date and must be at least 60%-owned by Thai individuals. Conditions for Existing BOI-Promoted Projects The company must have been wholly foreign-owned at the time the promotion certificate was issued. The shareholding structure must be amended following the issuance of the notification to establish a joint venture between a foreign juristic person and a Thai juristic person that has been operating in the automotive or auto parts industry for at least three years prior to the application date. This Thai juristic person must hold at least 20% of the registered capital

A new decree in Vietnam brings significant implementation clarity to the country’s existing extended producer responsibility (EPR) legal framework. An EPR mechanism was first codified in Vietnam in the 2020 Law on Environmental Protection amid ongoing challenges surrounding the collection and treatment of product and packaging waste. The mechanism was progressively detailed through Decree No. 08/2022/ND‑CP and its successive amendments, but the regulatory framework remained insufficiently developed, notably in terms of support mechanisms for waste collection, recycling, and treatment. The newly launched regulations in Decree No. 110/2026/ND-CP (Decree 110), issued on April 1, 2026, and taking effect on May 25, 2026, stipulate fully and clearly the responsibility of manufacturers and importers to recycle products and packaging and to treat waste. Some key provisions of Decree 110 for manufacturers, importers, and related stakeholders are presented below. Subjects of EPR The Law on Environmental Protection assigns responsibility to manufacturers and importers for product and packaging recycling (under Article 54) or waste collection and treatment (under Article 55), depending on the type of products and packaging they produce or import. Decree 110 elaborates on these EPR provisions by specifying the responsible entities and listing out the types of products and packaging subject to recycling and waste treatment responsibilities. Decree 110 clarifies the responsible entities in special cases, such as when products under the same brand are made by multiple manufacturers, when there is a contract manufacturing or entrusted import relationship, and when the manufacturer or importer is part of a corporate group. Notably, exemptions may be applied in some scenarios, such as for manufacturers and importers of products and packaging exclusively for export, temporary import and re-export, or research and testing purposes, as well as for entities with annual revenue from related products not exceeding VND 30 billion. Recycling Responsibilities Decree 110 clearly lists different types of products and packaging

Thailand’s Personal Data Protection Committee (PDPC) has launched a public consultation period on a draft notification setting out criteria for data subject access requests (DSARs). The draft notification addresses practical uncertainties in handling DSARs by introducing standardized procedural requirements for data controllers. The consultation period runs from April 16 to May 15, 2026. The notification will enter into force 30 days from the date of its publication in the Government Gazette. Key Features of the Draft Notification The draft notification covers the following key areas: Scope of information subject to access. Data controllers must enable data subjects to access at least the following upon request: (1) personal data collected directly from them; (2) personal data obtained from other sources; and (3) the source of personal data obtained from other sources without consent. Information required under section 23 of the PDPA and information that must be recorded pursuant to section 39 of the PDPA—such as the categories of personal data collected and purposes of processing—must also be made available. Submission channels and formal requirements. Data controllers must provide at least in-person and postal channels for DSARs, while electronic or other channels are optional. Requests may be made either directly by the data subject or through an authorized representative, and must be signed and include sufficient identifying information, a preferred response method, and DSAR details. Identity verification documents (and proof of authority if the request is through a representative) are required, and additional documentation may be requested for verification or communication purposes. Data controllers may use different verification methods for DSARs submitted via electronic or other channels, provided this does not create undue obstacles to the exercise of data subject rights. Verification and response timelines. Data controllers must complete preliminary verification within seven business days of receiving a request. If a request is incomplete or inaccurate,

Vietnam continues to refine its intellectual property framework to align with the 2025 amendments to the Law on Intellectual Property (IP Law). On March 31, 2026, the government issued Decree 100/2026/ND-CP (Decree 100), which substantially amends Decree 65/2023/ND-CP detailing the implementation of the IP Law (Decree 65). On the same day, the Ministry of Science and Technology released Circular 10/2026/TT-BKHCN (Circular 10), providing detailed procedural guidance and new forms. Both instruments took effect on April 1, 2026, along with the amended IP Law. While the updates touch on every IP right, trademark owners and brand strategists will find several practical and forward-looking changes that directly affect filing strategy, examination timelines, portfolio management, and enforcement readiness. 1. Fast-Track Substantive Examination for Eligible Applications One of the most business-friendly innovations is the new fast-track substantive examination pathway for applications meeting specified eligibility criteria. Successful fast-track applications enjoy a shortened substantive examination period of three months. This offers a significant competitive edge for tech-driven or regulated-sector brands. If the mark is identical or similar to a mark in another person’s trademark application with an earlier filing date in the case of a priority application that has not yet been processed, the fast-track process will return to the ordinary process. However, the law does not touch on cases where marks under fast-track examination face office action due to other reasons (i.e. lack of distinctiveness, confusingly similar to others’ copyright, trade name, industrial design, etc.) 2. AI-Generated Trademarks Receive Clear Protection Pathway Decree 100 explicitly addresses the use of artificial intelligence (AI) in IP creation, amending Article 10a of Decree 65 to confirm that trademarks created with AI systems are fully protectable, provided they meet the standard requirements of registration. Trademarks face no additional “human authorship” hurdle (unlike patents or industrial designs). Brand owners using generative-AI tools, however, are encouraged

Thailand’s Board of Investment (BOI) has introduced special investment promotion measures to accelerate the development of advanced automotive manufacturing technologies and the transitional electric vehicle ecosystem. Published in the Government Gazette on March 31, 2026, BOI Notification No. 4/2569 aims to stimulate the use of automation and robotic systems to improve production efficiency and increase the competitive capacity of Thailand’s automotive industry. Qualifying Project Categories All existing and new investment projects under the following promotional categories are eligible to apply for the new privileges: General automotive manufacturing (category 3.6) Manufacture of plug-in hybrid electric vehicles (PHEVs) and hybrid electric vehicles (HEVs) (category 3.8) Applications will be accepted until the end of 2027. Incentives and Benefits Eligible investment projects will receive exemption from import duties for machinery, and a 50% corporate income tax (CIT) exemption for three years on investment in automation and robotics systems, excluding land costs and working capital. If at least 30% of the total value of the modified or total machinery used is linked to or supports Thailand’s domestic automation machinery manufacturing industry, this CIT exemption will be increased to 100%. Eligible existing investment projects will be exempt from CIT on existing business income, with the exemption period counted from the date on which income is generated following receipt of the investment promotion certificate. Eligibility Conditions Projects must meet the following criteria to qualify for these privileges: The project must not currently benefit from CIT exemption. Those that have already received investment promotion may apply once their existing CIT exemption or reduction benefits have expired. The project must have an investment value of at least THB 1 million, excluding land cost and working capital but including expenditures for machinery, equipment, software, programs, information technology systems, and cloud or data center services, subject to conditions stipulated in the notification. The application must include a plan for investing in automated machinery or