You are using an outdated browser and your browsing experience will not be optimal. Please update to the latest version of Microsoft Edge, Google Chrome or Mozilla Firefox. Install Microsoft Edge

July 3, 2015

Recent Board of Trademarks Decisions on Similarity Encouraging for Trademark Applicants

World Trademark Review

When determining whether trademarks are identical or similar, trademark registrars and the Board of Trademarks used to be very consistent in their decision-making. In most cases, if a registrar refused to register a trademark and the applicant appealed the decision to the Board of Trademarks, the Board would typically confirm the registrar’s order and refuse to register that trademark. Only in unusual circumstances would the Board overturn an earlier decision by the registrar.

However, more recently, there has been a divergence between the decisions made by the registrars and the Board of Trademarks. In a number of cases, the registrar has reached a conservative decision, refusing applications on the basis of their similarity to registered marks. On appeal, however, the Board has taken a broader view and found that the marks were not sufficiently similar to cause confusion among the public. Through the examination of two recent cases in which the Board reversed an earlier decision of the registrar, this update will discuss this trend and consider what it means for trademark applicants.

In the first case, the applicant’s SAFFIRO mark was refused by the registrar based on its similarity to the previously registered CEFIRO mark. The applicant appealed this decision to the Board of Trademarks.

In comparing the trademarks, the Board opined that, although the trademarks each have three syllables and end in “firo,” the letters in the first syllable of each mark (i.e., “saf” and “ce”) created a visual difference between the trademarks.

Regarding pronunciation, the board noted that the applicant’s trademark can be pronounced “saf-fi-ro,” whereas the registered trademark can be pronounced “ce-fi-ro.” Therefore, the pronunciations of the parties’ marks were different, so that there would not be confusion among the public as to the ownership or origin of the goods. Hence, the applicant’s trademark was not considered similar to the registered mark, and in Decision No 1149/2557, the Board of Trademarks declared that the mark was registrable.

A second case in which the Board overturned a decision of the registrar involved the refusal of the mark CROFF (and circle device) based on its similarity to the mark COB (and shield device).

Disagreeing with the registrar’s initial refusal of the applicant’s mark, the Board held that the word element “croff” in the applicant’s trademark was placed in a circle device, while the word element “cob” in the registered trademark was placed within a shield device. Therefore, the trademarks were visually different.

Further, the Board found that the applicant’s trademark can be pronounced “croff,” whereas the registered mark can be pronounced “cob.” These differences ensured that there would not be confusion among the public as to the ownership or origin of the goods. The Board therefore decided (in Decision No 1152/2557) that the applicant’s trademark was not similar to the registered mark and could proceed to registration.

These decisions are encouraging for trademark applicants. In the past, applicants were frequently disappointed when marks that were allowed to coexist in other jurisdictions were refused by the Thai registrars on similarity grounds, and these decisions were then upheld by the Board. The Board’s more recent decisions have shown a willingness to challenge the criteria used by the registrars and focus on the real possibility of public confusion, rather than on vague similarities in appearance or pronunciation.

RELATED INSIGHTS​ 

August 20, 2026
As part of its membership in Lex Mundi, Tilleke & Gibbins has released the latest edition of its Guide to Doing Business in Thailand, providing an overview of the legal, regulatory, and commercial considerations for companies establishing or expanding operations in Thailand. The 2026 edition offers practical insight into the country’s business environment, investment framework, and operational requirements. The guide covers a wide range of topics relevant to foreign and domestic investors, including: Investment incentives and promotion schemes Financial facilities and banking regulations Exchange controls and money transfers Import and export regulations Business structures and incorporation options Requirements for establishing a business Operational and compliance considerations Business cessation and insolvency procedures Employment and labor laws Taxation Immigration and visa requirements Prepared by Tilleke & Gibbins lawyers across multiple practice areas, the publication outlines key aspects of doing business in Thailand, including foreign investment restrictions, regulatory compliance obligations, corporate structures, employment requirements, and recent legal and economic developments affecting investors. The publication forms part of Lex Mundi’s Country Guides series, a global collection of jurisdiction-specific reference materials prepared by member firms around the world. Together, these guides help companies evaluate opportunities, compare regulatory environments, and plan international business activities across multiple markets. The full Guide to Doing Business in Thailand 2026 is available through the button below.
August 13, 2026
Modern agricultural machinery is no longer purely mechanical but instead technology dependent. Modern tractors, harvesters, and other farm equipment increasingly incorporate embedded software, electronic control units, sensors, and digital diagnostic systems. While such technologies enhance efficiency, productivity, and precision farming, they also affect the manner of equipment repair and maintenance. As a result, farmers and independent repair providers may have little practical choice but to rely on authorized dealers, even for routine maintenance and repairs. Section 36 of Thailand’s Patent Act reflects the principle that the authorized sale of a patented invention usually exhausts the exclusive right of the patent owner over the specific product. This means that upon legal sale of the patented product, it can typically be used or resold without further authorization from the patent holder. This principle is relatively straightforward when applied to traditional mechanical equipment. Ownership of a machine ordinarily carries with it the practical ability to diagnose faults, replace worn parts, and restore the equipment to working order. Modern agricultural machinery, however, increasingly depends on embedded software, proprietary diagnostic systems, firmware updates, and other digital resources that may remain under the control of the manufacturer or patent holder. This tension lies within the “right to repair” debate. In the United States, on July 8, 2026, the Federal Trade Commission and five states announced a settlement with Deere & Company resolving allegations that Deere had unlawfully restricted farmers’ and independent repair providers’ ability to repair their equipment. Under the terms of the settlement, for the next ten years, Deere must provide repair resources, including software capabilities, on terms equivalent to those provided to authorized dealers. The Deere settlement highlights that the nature of ownership is changing, but legal concepts have not kept pace. Traditional patent-law concepts, including patent exhaustion, were developed with physical products
August 10, 2026
Thailand has finalized its social media KYC (“know your customer”) rules under Notification of the Electronic Transactions Commission on Measures to Prevent Technological Crimes for Social Media Service Providers (No. 2), which was published in the Government Gazette on May 5, 2026, and will take effect on November 1, 2026. While an early draft of the notification proposed requiring social media platforms to arrange identification of every user account, the final notification is significantly more targeted, focusing on paid online advertising and advertiser identity verification. Though the regulatory initiative primarily aims to combat online fraud and technology-related crimes, it also has important consequences for intellectual property enforcement, because the verified platform records that will be generated under the new requirements can help IP rights holders to identify anonymous online infringers. Key Regulatory Mandates The notification requires social media service providers to verify the identity of advertisers before their paid advertisements are published and disseminated in Thailand through social media, regardless of whether the advertising fees come from the advertisers or third parties. Verification of an advertiser is valid for one year, after which verification would have to be performed again before the platform could publish additional paid advertisements from the advertiser. Permitted verification methods are specified under the notification. A platform may verify an advertiser by checking identity evidence and confirming the connection between the advertiser and that identity evidence, with the notification giving facial comparison against certain government-issued identity documents as an example. Alternatively, platforms may verify advertisers through a digital identity verification and authentication system with an identity-proofing assurance level not lower than the level prescribed by Thailand’s Electronic Transactions Commission. The notification further requires platforms to retain only the advertiser’s information necessary to identify the advertiser, beginning from the start of the advertising activity and for
August 6, 2026
Introduction: A Trademark Paradox in Sustainable Packaging Walk into any Thai supermarket, and the label-free water bottle is no longer a novelty. Thailand’s packaging market, valued at approximately USD 15.68 billion in 2025, is shifting toward minimalist, plastic-light designs as ESG pressures reshape how brands present their products. The country generated roughly 5.68 million tons of plastic waste in 2021, with a recycling rate of only 19 percent, and regulators are now considering rules that would allow label-free bottled water relying on embossing, laser printing, or QR codes instead of wrap-around labels. As packaging itself becomes the brand identifier, a paradox emerges: designs built to say the least often struggle hardest for protection under Thai intellectual property law. The Trademark Barrier: When Shape Is Not Enough Section 7, paragraph 2(10) of the Thai Trademark Act deems a shape distinctive only if it is not the natural form of the goods, is not necessary to achieve a technical result, and does not add value to the goods. The Department of Intellectual Property’s 2022 examination guidelines apply this test conservatively, as the following examples illustrate. A plain water bottle relying on subtle contours to signal its brand is typically read as just another bottle, not a source identifier. Acquired distinctiveness offers a theoretical escape route, but it demands extensive evidence of sales, advertising, and consumer recognition—an especially heavy burden for new entrants whose minimalist packaging has not yet achieved market prominence. The result is a structural bias against precisely the design innovation that sustainability goals are meant to encourage. Design Patents: A Partial, Imperfect Substitute Design patent protection, covering a product’s shape, configuration, or ornamentation, appears to offer an alternative route. In practice, it is constrained by the same forces driving the minimalist trend. Because many brands converge on similar solutions—clear